F0 - REWINDER SLITTER
F0204 |
1.300 mm, unwind Ø: 1.250 mm, rewind Ø: 860 mm, 14 knives, Jagenberg |
|
F0226 |
1.500 mm, winding rod: 70 mm, reel width: from 5 mm, incl. exhaust and briquetting press |
|
F0195 |
1.500 - 2.850 mm, 450 - 550 mpm, unwind Ø: 1.500 mm, Perini |
|
F0117 |
1.550 mm, 200 mpm, 30 - 300 gsm, unwind Ø: 1.200 mm, rewind Ø: 290 mm, Polyslit, Göbel |
|
F0221 |
1.600 mm, 700 mpm, 25 - 70 gsm, unwind Ø: 1.300 mm, rewind Ø: 800 mm |
|
F0229 |
1.760 mm, 110 mpm, 30 - 240 gsm, unwind Ø: 1.270 mm, rewind Ø: 1.270 mm, BRP1, Hanssen |
|
F0224 |
2.200 mm, 600 mpm, 25 - 400 gsm, Voith, incl. web tensioning system |
|
F0173 |
2.200 mm, 1.800 mpm, up to 160 gsm |
|
F0187 |
2.200 mm, Jagenberg, in need of overhauling |
|
F0212 |
2.200 mm, 1.000 mpm, 30 - 200 gsm, unwind Ø: 1.500 mm, rewind Ø: 1.500 mm, 16 knives, Vari-Step, Jagenberg - new drive |
|
F0233 |
2.300 mm, Jagenberg, Conwind 2300, rereeler |
|
F0208 |
2.400 mm, 80 gsm, unwind Ø: 1.700 mm, rewind Ø: 900 mm |
|
F0168 |
2.400 mm, 1.000 mpm, 50 - 130 gsm, min./max. Ø: 105 / 1.300 mm, Jagenberg, winder |
|
F0227 |
2.400 mm, 1.200 mpm, Vari Dur, Jagenberg |
|
F0189 |
2.450 mm (untrimmed), 2.400 mm trimmed, 400 mpm, 30 - 700 gsm, unwind Ø: 1.800 mm, rewind Ø: 1.500 mm, 18 cutting bushings |
|
F0186 |
2.500 mm, 900 mpm, 30 - 600 gsm, unwind Ø: 1.540 mm, rewind Ø: 1.300 mm, Bruderhaus, still in operation |
|
F0223 |
2.500 mm (face), 800 mpm, 60 - 150 gsm, unwind Ø: 1.400 mm |
|
F0230 |
2.550 mm, 1.000 mpm, unwind Ø: 1.800 mm, rewind Ø: 1.800 mm |
|
F0209 |
2.600 mm, 1.200 mpm, 110 - 280 gsm, unwind Ø: 2.000 mm, rewind Ø: 1.500 mm |
|
F0231 |
2.640 mm, 1.000 mpm, unwind Ø: 1.600 mm, rewind Ø: 1.500 mm |
|
F0228 |
2.700 mm, 1.500 mpm, Lennox |
|
F0165 |
2.950 mm, 1.500 mpm, 180 - 450 gsm, unwind Ø: 3.000 mm, rewind Ø: 2.120 mm |
|
F0214 |
4.000 mm, Beloit, new drive Siemens S7 |
|
F0184 |
4.100 mm (trimmed), 1.500 mpm, 80 - 180 gsm, unwind Ø: 2.100 mm, rewind Ø: 1.525 mm, Vari-Roll, Jagenberg |
|
F0154 |
4.450 mm, 1.000 mpm, 16 - 130 gsm, unwind Ø: 1.150 mm, rewind Ø: 2.500 mm |
|
F0123 |
4.800 mm, 1.500 mpm, 40 - 135 gsm, unwind Ø: 2.000 mm, rewind Ø: 1.500 mm |
|
F0178 |
4.830 mm, 600 mpm, 180 - 560 gsm, unwind Ø: 2.000 mm, rewind Ø: 1.700 mm, 9 knives |
|
F0220 |
5.000 mm |
|
F0194 |
5.100 mm, 1.500 mpm, 40 - 150 gsm, unwind Ø: 2.000 mm, rewind Ø: 1.500 mm, Optislit, Göbel |
|
F0177 |
5.100 mm, 2.000 mpm, 70 - 200 gsm, unwind Ø: 1.500 mm, rewind Ø: 2.600 mm, Jagenberg |
|
F0166 |
7.060 mm, 1.800 mpm, 80 - 180 gsm, Beloit |
|
F0167 |
7.200 mm, 2.200 mpm, 50 - 150 gsm, unwind Ø: 2.500 mm, rewind Ø: 1.500 mm, Vari Top, Jagenberg |
|
F0158 |
2.850 mm, 1.300 mpm, Over Meccanica, jumbo roll Ø: 2.500 mm, finished reels Ø: 1.500 mm, no. of knives: 8 pcs., min. slitter width: 160 mm, no. of plies: 2 - for tissue |
|
F1 - CROSS CUTTER
F1143 |
400 - 2.200 mm, 40 - 180 gsm, Jagenberg, 2 unwind stands, 5 longitudinal knives, 1 cross knife |
|
F1138 |
850 mm x 420 mm, 60 - 250 gsm, piling height: 1.400 mm, SHM |
|
F1140 |
1.130 mm, Bielomatik, with ream wrapping Wrapmatic |
|
F1142 |
1.150 mm, Schneider Senator |
|
F1118 |
1.200 mm, 30 - 200 gsm, Bielomatik, sheet sizes: min. 430 - 610 mm, max. 720 - 1.100 mm |
|
F1147 |
1.220 mm x 1.640 mm size range, 3BL 185-7S, Polar, Transomat, max. piling height: 1.600 mm |
|
F1127 |
1.250 mm, Jagenberg |
|
F1129 |
1.320 mm, Senator 132, guillotine |
|
F1126 |
1.400 mm, Jagenberg |
|
F1119 |
1.400 mm, 30 - 200 gsm, Strecker, sheet sizes: 230 - 1.400 mm, 420 - 1280 mm |
|
F1112 |
1.400 mm, 24 - 125 mpm, 600 gsm, Strecker-Bruderhaus |
|
F1137 |
1.400 mm, 200 mpm, 600 gsm, Strachan |
|
F1110 |
1.400 mm, 300 mpm, 50 - 450 gsm, Bielomatik |
|
F1155 |
1.450 mm, 220 mpm, 60 - 180 gsm, knife load: 600 gsm, piling height: 1.100 mm, Convert 14, Jagenberg |
|
F1141 |
1.450 mm, 420 mpm, 60 - 250 gsm, Bielomatik |
|
F1160 |
1.600 mm, 400 mpm, 60 - 600 gsm, sizes: l: 550 up to 1.600 mm, w: 450 up to 2 x 1.090 mm, 2 unwind stands with flying splice, unwind Ø: 1.600 / 750 mm (min.) |
|
F1144 |
1.650 mm, 50 - 200 gsm, Bielomatik, 2 unwind stands |
|
F1145 |
1.650 mm, 50 - 200 gsm, Bielomatik, 2 unwind stands |
|
F1128 |
1.700 mm, Masson Scott |
|
F1157 |
1.700 mm, finished reel: 1.800 mm, 300 mpm, 2 unwind stands, sizes: 400 - 1.600 mm, max. knife load: 700 gsm |
|
F1158 |
2.100 mm, finished reel: 1.800 mm, 250 mpm, 2 unwind stands, sizes: 500 - 1.600 mm, max. knife load: 700 gsm |
|
F1135 |
2.300 mm, 400 mpm, 60 - 600 gsm, 2 unwind stands with flying splice, unwind Ø: 1.600 / 750 mm (min.) |
|
F1154 |
2.600 mm, 30 - 250 gsm, Jagenberg |
|
F1151 |
2.600 mm, 80 mpm, 30 - 250 gsm, piling height: 1.200 mm |
|
F1136 |
Cross cutter with ream wrapping unit, Wrapmatic, sizes: 430 mm x 610 mm - 700 mm x 1.000 mm |
|
F1078 |
Krause Wohlenberg, Programmatic T, type: A165 4 |
|
F3 - DIFFERENT MACHINES |
F3010V |
Extremultus drive belt, Siegling, endless, L40 x 4.500 x 170 mm |
|
F3128V |
Reel wrapping line, Kleinewefers, reel width: 425 - 3.200 mm, Ø: 750 - 1.525 mm, weight: 200 - 6.000 kg, 75 reels/h, wrapping material: kraft paper |
|
F3174V |
Reel wrapping unit, Pieri, reel dimensions: Ø 800 - 2.500 mm, length: 760 - 3.400 mm, max. weight: 3.000 kg |
|
F3246V |
Reel wrapping unit, reel width: 2.200 - 3.000 mm, Ø: 1.500 mm, weight: max. 3 t, wrapping material: paper |
|
F3247V |
Reel wrapping unit, Buma, reel width: 1.800 mm, Ø: 1.500 mm, weight: 2.000 kg, capacity: 30 reels/h, wrapping material: paper |
|
F3177V |
Reel winder, TR 450, Arsoma |
|
F3160V |
Pile turner, maximum size: 1.200 mm x 1.600 mm, loading height: 1.800 mm, turning speed: 25 s, 180°, fully automatic |
|
F3171V |
Pile turner, BSW8-1500 LDV/S, Baumann, carrying capacity: 1.500 kg |
|
F3172V |
Reversing unit, Schneider, paper sizes: max. 1.140 mm x 1.640 mm, min. 430 mm x 610 mm, piling height: 1.700 mm, table travel: 180 mm up to 1.700 mm |
|
F3173V |
Pallet conveyor, Keller, 1.500 mm x 5.000 mm x 820 mm (w x l x h), 1.625 mm x 6.000 mm x 750 mm (w x l x h) |
|
F3195V |
Ream wrapping machine, Wrapmatic, ream sizes: max. 100 - 1.400 mm, min. 420 - 530 mm, 15 reams/min |
|
F3130V |
Ream wrapping unit, Wrapmatic, 4 reels, reel dimensions: length: 650 - 1.600 mm x 1.000 mm Ø, 420 mm x 530 mm x 12 mm (h) resp. 1.000 mm x 1.400 mm x 80 mm |
|
F3248V |
Ream wrapping machine, Wrapmatic, ream size: max. 1.000 - 1.400 mm, min. 420 - 530 mm, ream height: max. 80 mm, min. 15 mm, capacity: 15 reams/min |
|
F3198V |
Wrapping line, Sicma |
|
F3169V |
Wrapping machine, Beck, 500 mm, passage height: 300 mm |
|
F3221V |
Wrapping line, WS 325, Siat, incl. scale, reel turner, turntable, stretcher |
|
F3222V |
Wrapping line, H 1600, Suepra, incl. scale, pallet turner, turntable, stretcher |
|
F3190V |
Sheet formation unit, RK, model: 20.12, Ernst Haage |
|
F3149V |
Label printing machine, model: 180, Kopack, face: 180 mm, 4 printer inking units, 2 die cutting stations |
|
F3150V |
Label printing machine, PW-250, Labelmen, face: 250 mm, 2 printer inking units |
|
F3240V |
Sealing machine, Hugo Beck, Super 400, with Hedda Euro hollow punch and angle turner |
|
F3218V |
Board sealing machine, Soco / Supertape, 50 mm / 1.000 linear meters per reel, with spare parts |
|
F3178V |
Waste press, 12 T, HSM |
|
F3201V |
Channel baling press, Avos 1810, Avermann, bale weight: max. 800 kg, throughput: 12 - 23 t/h, pressing capacity: 100 t, feeding opening: 1.800 mm x 1.000 mm, channel size: 1.100 mm w x 750 mm h |
|
F3202V |
Channel baling press, Avos 88-11/30, Avermann, bale size: 800 mm x 550 mm, bale weight max.: 250 kg, throughput: up to 94 m3/h (theoretically), pressing capacity 30 t, feeding opening: 800 mm x 800 mm |
|
F3203V |
Channel baling press, BHC 110 K, Bollergraaf, bale weights: up to approx. 1.300 kg, feeding opening: 1.600 mm x 1.100 mm, channel size: 1.100 mm x 1.100 mm, binding: 5-fold vertically + 5-fold horizontally, incl. a front pressure plate lock for simple com |
|
F3204V |
Baling press, HBC 100, Bollegraaf, bale size: 1.100 mm x 720 mm, bale weight: 550 - 800 kg, pressing capacity main press: 100 t, pressing capacity prepress: 50 t, feeding opening: 1.600 mm x 1.100 mm |
|
F3205V |
Baling press, HBC 110, Bollegraaf, bale weight: up to approx. 1.300 kg, pressing capacity: 100 t, specific pressing capacity: 8,26 kg/cm2, feeding opening: 1.600 mm x 1.100 mm, channel size: 1.100 mm x 1.100 mm |
|
F3206V |
Baling press, DKBP 150, Disan, pressing capacity: 150 - 170 t, pressing pressure: max. 300 bar, incl. conveyor |
|
F3207V |
Baling press, 5000 V 5, Europress, bale size: 730 mm x 1.040 mm, throughput: 180 - 220 m3/h, pressing capacity: 50 t, driving power: 22 kW, feeding opening: 1.250 mm x 1.100 mm, channel size: 730 mm x 1.040 mm |
|
F3208V |
Baling press, VK 1210, HSM, bulk weight: approx. 2,5 t/h, bale weight: 90 - 200 kg, throughput: up to 127 m3/h (theoretically), pressing capacity: 160 kN, 16 t, nominal power: 9,2 kW, idle cycle time: 9,1 sec., channel size: 700 mm w x 500 mm h, pump capa |
|
F3209V |
Baling press, VK 4012, HSM, bale size: approx. 720 mm x 900 mm x 600 - 1.200 mm length, throughput with a bulk weight of 40 kg/m3: max. approx. 12,8 t/h, pressing capacity: 45 t, driving power: 22 kW, feeding opening: 1.000 mm x 650 mm, channel size: 720 |
|
F3210V |
Baling press, 111 AS, MAC, pressing capacity: 170 t, driving power: 150 mHP / 2 x 55 kW, lifts per minute: 5, feeding opening: 2.100 mm x 1.020 mm, channel size: 1.100 mm x 1.100 mm, capacity of loading chamber: 2,54 m3, binding: 5-fold horizontally |
|
F3226V |
Baling press, Pacomat II, throughput: approx. 115 m3/h, driving power: 18,5 kW, feeding opening: 1.000 mm x 650 mm, channel size: 1.000 mm x 700 mm (h x w) |
|
F3220V |
Baling press, Pacomat IS, bale weight: max. 600 kg, bale length: 50 - 150 cm, bale size: 70 cm x 70 cm, with 2-fold wiring |
|
F3223V |
Baling press, Pacomat IS, throughput: up to 100 m3/h, pressing pressure: 35 t, driving power: 22 kW, feeding opening: 800 mm x 650 mm, channel size: 700 mm x 700 mm |
|
F3227V |
Baling press, Pacomat IIS, bale weight: up to approx. 450 kg (depending on pressed material and bale length), throughput: up to 85 m3/h, pressing pressure: 35 t / 350 kN, driving power: 18,5 kW, feeding opening: approx. 1.000 mm x 620 mm, channel size: 70 |
|
F3224V |
Baling press, Pacomat IV, throughput: up to 135 m3/h, pressing pressure: 50 t, driving power: 30 kW, feeding opening: 1.250 mm x 950 mm, channel size: 700 mm x 1.000 mm (h x w) |
|
F3225V |
Baling press, Pacomat V, bale size: 700 mm x 1.000 mm x length in mm, bale weight: up to 500 kg, throughput: approx. 240 m3/h, driving power: 45 kW, feeding opening: 1.250 mm x 950 mm, binding: 3-fold horizontally |
|
F3211V |
Baling press, Paal, Konti 125, bale size: approx. 700 mm x 1.000 mm x adjustable length, bale weight: up to approx. 450 kg (depending on pressed material and bale length), throughput: with a bulk weight of 35 kg/m3 supermarket paper: approx. 5,8 t/h, with |
|
F3212V |
Baling press, Paal, Konti 125 C SO, bale size: approx. 700 mm x 1.000 mm x adjustable length, bale weight: up to approx. 500 kg (depending on pressed material and bale length), pressing capacity with max. 270 bar: 400 kN, 40 t |
|
F3213V |
Baling press, Paal, Konti 200 C, bale weight: 425 - 550 kg (depending on pressed material and bale length), throughput: up to 200 m3/h, with a bulk weight of 35 kg/m3 piled supermarket paper: approx. 7,35 t/h, with 60 kg/m3 mixed paper: approx. 12,0 t/h, |
|
F3214V |
Baling press, Paal, Konti 200 C, bale weight: 425 - 550 kg (depending on pressed material and bale length), throughput: up to 200 m3/h, with a bulk weight of 35 kg/m3 piled supermarket paper: approx. 7,35 t/h, with 60 kg/m3 mixed paper: approx. 12,0 t/h, |
|
F3215V |
Baling press, Paal, Konti 200 C (k), bale weight: 425 - 550 kg (depending on pressed material and bale length), throughput: with a bulk weight of 20 kg/m3 loose supermarket paper: approx. 3 t/h, with 35 kg/m3 piled supermarket paper: approx. 5 t/h, with 6 |
|
F3216V |
Baling press, Paal, Konti 200 C / k, bale size: 750 mm x 1.100 mm, bale weights: up to approx. 600 kg, throughput under working conditions: up to 275 m3/h, pressing capacity: 65 t, driving power: 1 x 45 kW + 1 x 30 kW, feeding opening: 1.020 mm x 1.550 mm |
|
F3228V |
Baling press, Paal, Konti 275 B, bale size: 750 mm x 1.100 mm x adjustable mm, bale weight: 450 - 600 kg (depending on pressing pressure), throughput: up to 200 m3/h, pressing pressure: 60 t, idling capacity: approx. 390 m3/h, feeding opening: 1.020 mm x |
|
F3233V |
Baling press, Paal, Konti 600C, bale size: 1.100 mm x 1.100 mm x length in mm, bale weight: approx. 700 - 1.000 kg (depending on pressed material and bale length), throughput: approx. 510 m3/h, pressing pressure: 125 t, feeding opening: 2.000 mm x 1.020 m |
|
F3235V |
Baling press, Paal, Konti 700 F/K, bale size: 1.100 mm x 1.100 mm x length in mm, throughput: approx. 650 m3/h, pressing pressure: 170 t, feeding opening: 2.000 mm x 1.020 mm reducible by adjustable position of pressure plate, binding: 5-fold vertically w |
|
F3245V |
Baling press, LP50EH 2, Presona, bale weight: up to 550 kg, throughput: 340 m3/h, pressing capacity: 50 t (6,31 kg/cm2), feeding opening: 1.250 mm x 1.100 mm, channel size: 720 mm x 1.100 mm |
|
F3170V |
Spindle press, Vogt, feeding dimensions: 700 mm x 700 mm |
|
F3185V |
Baling press, AK 807, HSM, bale length: 400 / 600 mm, bale weight: 30 - 60 kg (with 600 mm), pressure: 82 kN |
|
F3071V |
Wrapping press, Signode, working width: 2.400 mm, working height: 2.800 mm |
|
F3238V |
Pallet strapping unit, KCK – 131-28, Mosca, transport speed: from 8 to 19 m/s continuously adjustable, belt width: from 9 to 15,5 mm (not adjustable), pressing pressure: 0 t to 3 t, fully automatic plastic belt strapping machine for polypropylene and/or p |
|
F3249V |
Pallet wrapping unit, DOX - Stretchpack, consisting of: foil taping machine, taping system: Cyclop, pallet dimensions: max. 1.400 mm l x 1.020 mm w x 1.400 mm h, max. pallet weight: 850 kg, capacity: 30 pallets/h |
|
F3168V |
Aligning and strapping machine, Signode-ISB-Mono 900, working width: 170 mm x 900 mm |
|
F3186V |
Wrapping line for stretch foils, 1.600 mm x 1.600 mm, reel weight: 3,5 t, compl. with reel transporting system and tilting table |
|
F3175V |
Foil wrapping machine, EKH - 455, Winkelschweißer, working width: 450 mm x 550 mm |
|
F3179V |
Foil wrapping machine, Sealmatic 79 E, Minipack |
|
F3135V |
Core saw, Ahlström / Hanssen, year of manufacture: 1989 |
|
F3126V |
Core saw, Pakea, max. 2.100 mm, min. 80 mm, year of manufacture: 2010 |
|
F3166V |
Core saw, TM 50, Beloit |
|
F3127V |
Core saw unit, fully automatic, core length: 3.200 mm (core Ø: 70, 76 mm), core length: up to 1.610 mm (core Ø: 150 mm) |
|
F3139V |
Core cutting machine, type: Treom 2001, with dust exhaust |
|
F3199V |
Guillotine, De Pekker, working width: 2.600 mm x 1.800 mm Ø |
|
F3239V |
Guillotine, Matthiessen, RS-04, reel width: 4.000 mm x 1.500 mm Ø |
|
F3176V |
Milling machine, DMU 50T, Deckel |
|
F3250V |
Chest with agitator, volume: 25 m3, dimensions: 3.000 mm Ø x 5.010 mm h, open at the top, with bottom (inclination: 15 - 20°), generally overhauled |
|
F3229V |
MRP-AT, mark frame, basis weight MRP FLG5, with measuring of moisture and thickness |
|
F3230V |
Incore Systems, web inspection, standard paper width: 900 mm, max. paper speed: 120 m/min-1, product type: paper for banknotes, passports, safety paper with or without watermark, with or without safety thread, transverse resolution: 75 μm, longitudinal re |
|
F3231V |
Drive for paper machine |
|
F3241V |
Dewiring for waste paper bales, Voith, bale size: length: 1.000 - 2.400 mm, width: 600 - 1.200 mm, height: 1.200 mm, moisture: 8 - 12 % |
|
F3232V |
Thread unwinding station, data of unwinding heads: unwinding heads: 13, unwinding speed: 0 - 100 mpm (normally 20 - 85 mpm), web tension adjustable: 20 - 300 cN (1 cN approx. equal 1 gram) |
|
F3236V |
EcoAir compressor, size: D 50, 5 m3/h, 10 bar, 37 kW |
|
F3217V |
Frequency converter, type: 134H3265, Danfoss |
|
F3157V |
Clamp for fork lift, HRK 1518, E.L.M. Kragelund |
|
F3158V |
Clamp for fork lift, 1.5T458P, Kaup, max. 200 bar |
|
F3141V |
Industrial vacuum system, DS 2520 M-B1, Ruwac, voltage: 400 V, power: 5,5 kW |
|
F3138V |
Valve, DN 300, Lohse, pneumatic, overhauled |
|
F3120V |
Valves, DN 250, PN 25, P2L 250AK B1C32 NI6256, Neles, newworthy - 2 pcs. available |
|
F3136V |
Propeller, Ø: 800 mm, cast |
|
F3137V |
Propeller, Escher Wyss, Ø: 1.250 mm, cast |
|
P0 - BOILER HOUSE, TURBINES, GENERATORS
P0006 |
2,4 t/h, 16 bar, 450 kW - 1,7 MW, Viessmann, boiler for heavy oil |
|
P0027 |
5 t/h, 9 bar, boiler with gas burner 5 MW, 1997 |
|
P0025 |
12 t/h, 8 bar, Duisburg, steam boiler |
|
P0024 |
22 t/h, 40 bar, Babcock, boiler |
|
P0012 |
16 bar, Babcock, boiler - newworthy |
|
P0021 |
18 bar, boiler house, 6.800 kg steam/h, 1.300 kVA |
|
P0026 |
38 bar, turbine 2.1 MW, 1.000 rpm, counter pressure: 1,4 bar, generator Siemens 1.500 rpm |
|
Z0 - PULP PLANTS AND MACHINERY FOR THE PULP PRODUCTION
Z0011 |
36 tpd, manila cellulose plant with bleaching and digester - complete |
|
Z0016 |
150 tpd, SC cellulose production |
|
Z0022 |
150 - 250 m3/h, Rauma Repola, wood preparation for pulp mill |
|
Z0025 |
200 tpd, HC bleaching unit, double-wire presses 4.250 mm and 3.800 mm, HC mixing unit, dosing station for chemicals, HC bleaching tower with 6 feeding screws |
|
Z0024 |
320 tpd, Andritz, bleaching unit |
|
Z0023 |
400 tpd, bleaching tower |
|
Z0013 |
Wood pulp line, compl. with wood preparation, stock preparation, cooker and burner |
|
|