A0 - PULPER

A0122 12 m3, broke pulper under the machine
A0137 12 m3, Andritz, FSV, throughput: up to 45 tpd, stock consistency: 5 - 9 %
A0124 20 m3, machine pulper, Andritz
A0141 20 m3, Trimvac, TM - Systems
A0140 53 m3, reject pulper, Valmet
A0139 FF 375, dissolving drum, Andritz, throughput: up to 850 tpd, 3,3 m x 16,5 m
A0078 Rotor for VS 80 pulper Voith
A0135 Rotor for Grubbens pulper, Ø = 600 mm
A0125 Ragger, Voith, ZW 3
A0087 Ragger, Voith
A0104 50 tpd, stock preparation for the production of brown papers, Voith
A0002 400 tpd, OCC stock preparation
A0117 Chain conveyor, Paal, KEM 1000, feeding width: 1.000 mm, charging length: 5.000 mm
A0120 Chain conveyor, Paal, KES 1750, feeding width: 1.750 mm, charging length: 18.370 mm
A0121 Chain conveyor, Wersteria, KG A 1300, feeding width: 1.250 mm, charging length: 6.000 mm
A0134 Plate conveyor, length: 12 m, with 8 weighing cells and with dewiring equipment: 35 bales/h
A0128 Junction box, newworthy

High Consistency Pulper

A0136HD 5 m3, Lamort, Helico, stock consistency: up to 15 %
A0118HD 6 m3, 50 tpd, 13 - 15 %, perforation: 8 mm, with conveyor and stock pump
A0023HD 28 m3, high-density pulper, size: 9A, 140 - 190 tpd, 14 - 16 %
A0135HD 40 m3, stock consistency: up to 15 %, with reject pump
A0119HD 70 m3, ST 10-CW, pulper mounting with stock box, Voith


A1 - SECONDARY PULPER ( Purger, Poire, Fibersorter, ....)

Voith

A1124 F0, screen drum, throughput: up to 80 tpd, dimensions: 1.000 mm Ø x 1.600 mm length, inlet stock consistency: 2 - 4 %, screening area: approx. 5 m2, perforation: 16 mm, separates the areal impurities contained in the waste paper from the fibre, the impuri
A1094 F4-P.B, Fiberizer, throughput: 10.000 - 15.000 lpm, stock consistency: 3 - 6 %, perforation: 7 mm, useful capacity: 2,3 m3, installed power: 200 kW, screening / discharging machine, directly next in line after the pulper, dumping during discharge to the s
A1159 ATS10, Turboseparator
A1116 ATS20 / 21, Turboseparator, throughput: 135 - 190 tpd, pulper: 20 - 26 m3, stock consistency: up to 5 %, power requirement: 100 / 135 kW, cleaning machine in the perforated screening
A1169 ATS30 / 31, Turboseparator, incl. spare parts
A1082 ATS41, Turboseparator, throughput: up to 450 tpd, pulper: up to 60 m3, stock consistency: up to 5 %, power requirement: 300 kW, cleaning machine in the perforated screening
A1147 CM10, Pump Contaminex, throughput: up to 7.000 lpm
A1168 CM20 / 21, Pump Contaminex
A1097 CM30, Pump Contaminex, throughput: 11.000 - 15.000 lpm, useful capacity: 0,75 m3, stock consistency: up to 5 %, power requirement: 75 kW, max. volume: 50 m3, screening machine when using unsorted waste paper, directly next in line after the waste paper pu
A1141 CM30, Pump Contaminex, throughput: 11.000 - 15.000 lpm, useful capacity: 0,75 m3, stock consistency: up to 5 %, power requirement: 75 kW, max. volume: 50 m3, screening machine when using unsorted waste paper, directly next in line after the waste paper pu
A1080 CMS40, Wire Contaminex, throughput: up to 20.000 lpm, stock consistency: up to 5 %, perforation: 4 mm, free area: approx. 33 %, power requirement: 92 kW, screening machine for coarse screening after high-density pulper
A1171 CMS 200, Wire Contaminex, throughput: up to max. 5.500 lpm, stock consistency: 4 - 5 %, perforation: 8 mm, motor rate: 75 kW (motor: 90 kW)
A1154 CMV10, Wire Contaminex
A1138 STR5 F, screen drum, throughput: up to 5.820 lpm, approx. 170 - 230 tpd, dimensions: 1.600 mm Ø x 2.800 mm length, stock consistency: up to 2 %, screening area: 14 m2, perforation: 12 mm
A1140 Wire basket, perforation: 2,2 mm, C-Bar, for Combisorter and Sortex 0S, CS10, CSM12 - 500 mm, Voith
A1142 Size: 10 S, perforation: 1,2 mm
A1145 13W, Spectroscreen, throughput: up to 1.000 lpm (at a stock consistency of 3 %), up to 6.000 lpm (at a stock consistency of 1 %), screening area: 0,75 m2, slots: 0,45 mm
A1167 ZTR 15/25, screen drum, throughput: up to 250 tpd, perforation: 16 mm, dimensions: 1.500 mm Ø x 2.500 mm length

Escher Wyss

A1125 F1-TE BP, Fiberizer, throughput: 30 - 85 tpd, perforation: 6 mm, vat capacity: 0,55 m3, stock consistency: 3 - 6 %, installed power: 75 kW, for screening of contaminants and forward screening of dissolved stock fibres
A1172 F1-TE.BP, Fiberizer, perforation: 6 mm, motor rate: 90 kW, compl. with valves and motor
A1163 F1-T, throughput: up to 150 tpd, stock consistency: up to 5 %
A1161 F1-T, throughput: up to 150 tpd, stock consistency: up to 5 %
A1133 FS0B, Fibersorter, throughput: up to 55 tpd, useful capacity: 0,32 m3, installed power: 45 kW, used as pre-screening machine, directly after the pulper, for separating light and heavy contaminants
A1160 F2, throughput: up to 200 tpd
A1126 F2-P.B., Fiberizer, throughput: up to 8.500 lpm, useful capacity: 1,1 m3, stock consistency: 5 - 6 %, power requirement: 120 kW, screening / discharging machine, directly next in line after the pulper, dumping during discharge to the screen drum, installa
A1162 F2-T, throughput: up to 200 tpd
A1076 F2-TS, Fiberizer, Twin Pulp, throughput: up to 4.800 lpm, useful capacity: 1,1 m3, perforation: 14 mm (spare screen plate, perforation: 12 mm), stock consistency: 3 - 6 %, power requirement: 160 kW, the Twin Pulp Fiberizer effectuates an increase of the c
A1078 F2-TS, Fiberizer, Twin Pulp, throughput: up to 4.800 lpm, useful capacity: 1,1 m3, perforation: 16 mm, stock consistency: 3 - 6 %, power requirement: 160 kW, the Twin Pulp Fiberizer effectuates an increase of the capacity by forward working Fiberizer acce
A1101 FS4, Fiberizer, throughput: up to 400 tpd, useful capacity: 3,2 m3, power requirement: 250 kW, for screening of contaminants and forward screening of dissolved stock fibres, this machine can also be used as Fibersorter (separates light and heavy contamina
A1164 RS 2B, up to 35 tpd

Kadant - Lamort

A1088 II XVF 42, Hydrapurge, perforation: 8 mm, motor rate: 100 kW
A1056 DF 3, Diabolo, perforation: 3,5 mm
A1149 DT2, Diabolo, slots: 0,30 mm + 1 spare basket (slotted), throughput: 80 - 120 tpd, 100 m3/h

Beloit Jones

A1093 Size II, Bel Purge 72, perforation: 9 mm
A1092 Screen drum, throughput: up to 170 tpd, dimensions: 1.600 mm ∅ x 5.350 mm (3.800 mm perforated) length, stock consistency: 2 - 3 %, perforation: 10 mm, separates the contaminants of sheetlike nature contained in the waste paper from the fibre, the contami

Various

A1111 ATP - 35/1, coarse screen, 17.000 lpm, perforation: 8/6 mm
A1174 DP300-650, discharge pump, Andritz, throughput: up to 4.500 lpm, flow speed: 0,5 lpm, stock consistency: up to 4 %, max. working pressure: 1,8 bar, inlet pressure: min. 0,2 bar
A1166 DP 350 - 650, detrashing pump, Andritz, similar to Pump Contaminex
A1165 FB 2, FibreBatch, Andritz, throughput: 100 - 140 tpd, vat volume: 1,1 m3, motor rate: 132 kW, similar to Wire Contaminex CMV11
A1065 FW D2, screen drum, Andritz, throughput: 100 - 140 tpd, 1.250 mm Ø x 2.500 mm l, screening area: 8,6 m2 - newworthy
A1173 Rotorpurge similar to HYDRAPURGE from Lamort, size: 33.1200, perforation: 12 mm, capacity: up to 80 tpd, throughput: up to 1.200 lpm


A2 - HIGH DENSITY CLEANER

A2028 D1C-S, Escher Wyss, throughput: 1.000 - 1.500 lpm (at a stock consistency > 4 %), throughput: 800 - 1.200 lpm (at a stock consistency < 4 %)
A2048 D1-S, Escher Wyss, throughput: 600 - 800 lpm, stock consistency: 3 - 5 %
A2046 D2P-S, Escher Wyss, throughput: 1.000 - 2.500 lpm, stock consistency: 2 - 5 %
A2062 D2C-S, throughput: 1.500 - 4.000 lpm, stock consistency: up to 5,5 %
A2017 CT 180H IRD - 2V, Cyclotech, throughput: up to 3.000 lpm, stock consistency: 3 - 5 %
A2061 FC - 40, Aikawa, throughput: up to 2.200 lpm, stock consistency: up to 5,5 %, with heavy-dirt trap, valve and support
A2057 RB300 HD4 - 2, Andritz, throughput: up to 18.000 lpm, stock consistency: up to 5 % - 2 pcs. available
A2064 S3, Voith, throughput: up to 1.200 lpm, stock consistency: up to 5,5 %, compl. with valves
A2041 17", Kadant/Lamort, throughput: 3.400 - 6.200 lpm, stock consistency: 3 - 5,5 %
A2054 Glass cones, Voith, for all high-density cleaners of the model series "S"


A3 - DEFLAKER & DISPERGER

Deflaker

Voith

A3039E 1E, max. throughput: 10 - 55 tpd (depending on the ∅ of the installed fillings), stock consistency: 3 - 6 %, power requirement: 60 - 80 kW (depending on the raw material), with conversion set
A3036E 2E, max. throughput: 40 - 120 tpd (depending on the ∅ of the installed fillings), stock consistency: 3 - 6 %, power requirement: 120 - 180 kW (depending on the raw material)
A3062E 2E, max. throughput: 40 - 120 tpd (depending on the ∅ of the installed fillings), stock consistency: 3 - 6 %, power requirement: 120 - 180 kW (depending on the raw material)
A3043E 2E, max. throughput: 40 - 120 tpd (depending on the ∅ of the installed fillings), stock consistency: 3 - 6 %, power requirement: 120 - 180 kW (depending on the raw material), with large number of spare parts
A3070E 2E, throughput: max. 40 - 120 tpd (depending on Ø of the installed fillings), stock consistency: 3 - 6 %, power requirement: 120 - 180 kW (depending on the raw material)

Escher Wyss

A3038E E1K, max. throughput: up to 40 tpd (at a stock consistency of 4 %), stock consistency: 4 - 6 %, power requirement: 30 - 50 kW (depending on the raw material)
A3057E E2K, max. throughput: up to 75 tpd (at a stock consistency of 4 %), stock consistency: 4 - 6 %, power requirement: 80 - 150 kW (depending on the raw material) - completely overhauled, 60 Hz

Valmet - Metso

A3041E JF - 55, Valmet, Defibrator, throughput: 15 - 50 tpd (at a stock consistency of 2 - 6 %), motor rate: 55 kW
A3046E JF - 160, Valmet, throughput: 26 - 145 tpd (at a stock consistency of 2 - 6 %), motor rate: 160 kW
A3021E JJF - 315, Valmet, throughput: 60 - 310 tpd (at a stock consistency of 2 - 6 %), motor rate: 300 kW

Various

A3064E SM D2, Siefer
A3069E Shredder (single-shaft disintegrator) with conveying equipment, Vecoplan, 45 teeth, wire perforation: 120 mm, capacity: 8-12 t/h, rotor width: 2.500 mm x 640 mm Ø

Disperger

A3047D HD 1, Escher Wyss, hot dispersion unit, complete with double wire press, desintegrating screw and heating screw, incl. spare parts
A3046D HDT 150-D, Voith, disperger, throughput: up to 150 tpd, motor rate: 550 kW
A3034D HD 4, Voith - Escher Wyss, hot dispersion unit, throughput: up to 250 tpd - complete, incl. speed heater and all screws
A3041D HD 4, Voith - Escher Wyss, disperger, with gap adjustment, incl. spare fillings
A3048D HD4B, Escher Wyss, disperger, throughput: up to 420 tpd, stock consistency: 30 %, motor rate: 1,8 MW
A3022D KD 450, Krima, Cellwood, 45 t/24 h - very good condition
A3049D KD1050, Cellwood, disperger, throughput: up to 700 tpd, stock consistency: 30 %, motor rate: 1,8 MW, incl. feeding and heating screw
A3038D Feeding and heating screw for ZSE 10, Voith
A3044D ZF150 200 P-2, Apro, pre-dispersion unit
A3039D 9.200 mm l x 1.350 mm Ø, Escher Wyss, heating screw, throughput: up to 350 tpd


A4 - REFINER

Conical Refiner

Voith

A4056K 1R, throughput: 6 - 25 tpd, stock consistency: 3 - 6 %, motor rate: 55 - 70 kW
A4071K 2R, throughput: 15 - 40 tpd, stock consistency: 3 - 6 %, motor rate: 110 kW

Escher Wyss

A4035K R2, throughput: 40 - 60 tpd, stock consistency: 3 - 6 %, motor rate: 60 - 110 kW
A4018K R2, throughput: 40 - 60 tpd, stock consistency: 3 - 6 %, motor rate: 60 - 110 kW
A4074K R2, throughput: 40 - 60 tpd, stock consistency: 3 - 6 %, motor rate: 60 - 110 kW

Valmet - Metso

A4070K JC 01, 250 kW, 750 rpm, generally overhauled, without fillings
A4076K JC 01, stock consistency: 2 - 6 %, 315 kW
A4029K JC-05, with motor, 3 MW

Various

A4059K 101, Bolton Emerson, steep-angle conical refiner, motor rate: 200 kW, 3 pcs.
A4054K 101, Claflin, Bolton Emerson
A4072K Size: 300, Aikawa, throughput: up to 150 tpd, motor rate: 220 kW
A4075K Papillon, Andritz, conical refiner, throughput: 400 - 1.100 lpm (24 - 48 tpd), stock consistency: 3 - 3,3 %

Disk Refiner

Voith

A4074D DSR2C-P, disc Ø: 660 - 760 mm (26" - 30")

Beloit Jones

A4067D 20", double-disc refiner, with spare fillings
A4060D DD 3000, throughput: 50 - 60 tpd

Various

A4065D 20", Bruno, double-disc refiner, disc Ø: 508 mm
A4066D 20", Celli, double-disc refiner, with spare fillings
A4076D 26", Twin Flow R26 EMA III, Sprout Bauer
A4063D 42", LC, Sprout Waldron, double-disc refiner
A4064D RGP 60S, Sunds, double-disc refiner, incl. feeding screws
A4056D TF 26, Andritz, 3x newworthy, only little in operation


A5 - THICKENER

Cylinder mould thickener

A5039R 2.000 mm face x 900 mm cylinder Ø, throughput: up to 30 m3/h at the inlet, inlet stock consistency: up to 0,2 %, outlet stock consistency: up to 0,5 %
A5036R 2.000 mm face x 1.250 mm cylinder Ø, Finckh, cylinder mould thickener, with couch roll, screening area: 8 m2, inlet stock consistency: 2,5 - 3 %, outlet stock consistency: 6 - 7 %
A5046R 2.500 mm face x 1.000 mm Ø, Wandel
A5044R 3.000 mm face x 1.250 mm Ø, Finckh, size: 1230, screening area: 12 m2
A5047R 3.000 mm face x 1.250 mm Ø, Finckh

Disc filter & disc thickener

A5060SF 1.750 mm disc Ø, Kufferath, AKSE 175 - 01, disc filter, inlet stock consistency: 0,2 - 5 %, outlet stock consistency: 0,2 - 5 %, filter surface: 2,4 m2
A5027SF 2.800 mm disc Ø x 4.800 mm length, AMF 30A, Algas, Microfilter, throughput: 830 - 1.200 lpm, inlet stock consistency: 3 - 5 ‰, short-term up to 2 %
A5036SF 3.000 mm disc Ø, Cellwood, disc filter, 14 discs, throughput: up to 120 tpd (8.340 lpm), inlet stock consistency: 1%, outlet stock consistency: 10%
A5048SF 3.500 mm disc Ø, ZNP 3516, Fjlime, disc filter, 16 discs, throughput: up to 22.570 lpm (at 0,4%), screening area: 190 m2
A5032SF 3.800 mm disc Ø, 8 discs each with 16 segments, Voith, disc filter, screening area: 90 m2
A5056SF AMF 45 HPW, Algas, filter

Screw press & inclined thickener

A5053SP BX 400 - S, Kufferath, screw press, cylinder size: 400 mm
A5088SP PSS 4-250, FAN, screw press, cylinder: 520 mm length x 260 mm Ø, outlet stock consistency: up to 70 % (average 35 - 55 %), throughput: 10 t/24 h
A5033SP SP 23, Thune, screw press, 36 tpd, inlet stock consistency: 4 - 5 %, outlet stock consistency: up to 30 %
A5025SP SP 45L, Thune, screw press, screw Ø: 450 mm x 4.160 mm length, throughput: 50 - 120 tpd, inlet stock consistency: 4 - 12 %, outlet stock consistency: 20 - 35 %
A5026SP SP 45 SL, Thune, screw press, screw Ø: 450 mm x 4.910 mm length, throughput: 50 - 120 tpd, inlet stock consistency: 4 - 12 %, outlet stock consistency: 20 - 35 %
A5032SP SP 45 SL, Thune, screw press, screw Ø: 450 mm x 4.910 mm length, 50 - 100 tpd, inlet stock consistency: 4 - 12 %, outlet stock consistency: 20 - 35 %
A5029SP SP 70 SL, Thune, screw press, throughput: up to approx. 300 tpd
A5031SP SP 150 L, Thune, screw press, throughput: 500 - 1.000 tpd, inlet stock consistency: up to 4 %, outlet stock consistency: up to 35 %
A5036SP TSX 60 3-30, Meri, Screenex, cylinder: 5.100 mm length x 530 mm Ø, inclination: 30°, main range of use: dewatering of all light and heavy rejects arising e.g. in the Contaminex or the heavy-dirt trap at the pulper. The reject is surface-dry after dewateri
A5052SP WPCM 20, reject press, Wagner, inlet stock consistency: < 10 %, outlet stock consistency: > 40 %, throughput: 3 - 4 t/h
A5030SP GR-III, Maule, screw press, throughput: up to 130 tpd, inlet stock consistency: up to 10 %, outlet stock consistency: up to 30 %, with disperger

Double-wire press, angle moulding press & centrifuge

A5039DP 700 mm (working width), throughput: up to 25 m3/h, inlet stock consistency: up to 3,5 %, outlet stock consistency: 35 - 50 %, residual moisture
A5042DP 800 mm, 30 - 50 tpd, outlet stock consistency: up to 70 %, Andritz, wet lap line
A5035DP 1.500 mm (working width), model: CPF 1.500, Andritz, double-wire press, throughput: 30 - 45 tpd, inlet stock consistency: up to 3,5 %, outlet stock consistency: up to 35 %
A5032DP 2.000 mm (working width), double-wire press
A5030DP 2.600 mm (working width), Andritz, double-wire press, throughput: up to 320 tpd, inlet stock consistency: up to 4,5 %, outlet stock consistency: up to 35 %
A5058DP 2.800 mm (working width), model: DSP 28, Andritz, double-wire press, throughput: up to 250 tpd
A5059DP 2.800 mm (working width), Andritz, double-wire press, throughput: up to 450 tpd
A5092DP Centrifuge, model: Herkules 470/4, Pieralisi, throughput: up to 55 m3/h

Washer

A5040W 2.550 mm l x 800 mm Ø, FW 80-400-T-3, Apro, fibre washer
A5038W 2.500 mm, 1.000 mm width of lip, inlet stock consistency: 1 %, outlet stock consistency: up to 5 %, throughput: up to 19.000 lpm at 1,5 bar, operation pressure max.: 1,5 bar, working speed: 500 - 900 mpm
A5036W 48'', Beloit, dynamic washer
A5041W FFW 150-200, Apro, foil washer


A6 - AGITATOR

A6001 HRG 80-900, Paprys, propeller agitator
A6002 P800A-G, Voith, propeller agitator, propeller Ø: 800 mm, propeller speed: 277 rpm, power requirement: 8,8 kW, compl. unit
A6003 P1000A-G, Voith, propeller agitator, propeller Ø: 1.000 mm, propeller speed: 260 rpm, power requirement: 14 kW, compl. unit
A6005 Propeller, Ø: 800 mm, cast
A6006 Propeller, Escher Wyss, Ø: 1.250 mm, belt pulley Ø: 1.500 mm, cast
A6007 Propeller, Comecart, for chest: 200 m3, Ø: 1.500 mm, with belt pulley Ø: 1.500 mm, motor: 75 kW or 90 kW
A6008 Propeller, Comecart, for chest: 75 m3, Ø: 750 mm, motor: 30 kW


A7 - DEINKING

A7018 80 tpd, Voith, de-inking cells, 1 mixing cell, 4 primary/1 secondary cell
A7026 80 - 120 tpd, F0 I2B, Voith, multi-injector cells, 5.500 l/cell, 5 primary/2 secondary cells per line
A7030 ECC5/41, Voith, flotation unit, throughput: up to 15 m3/min.
A7029 ECC5/41, Voith, flotation unit, throughput: up to 30 m3/min.
A7020 PDM 6000, Beloit, 11,3 m x 2,5 m x 2,5 m