F0 - REWINDER SLITTER
| F0238 |
250 - 1.600 mm, 20 - 200 gsm, unwind Ø: 1.200 mm, rewind Ø: 800 mm, friction roller |
|
| F0253 |
300 - 800 mm, 700 - 1.250 mm Ø, 1.000 mpm, 60 - 160 gsm, 5 knives |
|
| F0250 |
1.500 mm reel width, 1.000 mpm, 12 - 35 gsm, max., unwind Ø: 1.200 mm, rewind Ø: 750 mm, palletising robot |
|
| F0258 |
2.200 mm, 1.400 mpm (act. reduced to 400 mpm), rewinder slitter for clinics with unwinding station |
|
| F0243 |
2.400 mm, up to 300 mpm, 300 - 900 gsm, unwind Ø: 1.500 mm, rewind Ø: 1.250 mm - for board, Jagenberg, Vari Dur |
|
| F0208 |
2.400 mm, 80 gsm, unwind Ø: 1.700 mm, rewind Ø: 900 mm |
|
| F0189 |
2.450 mm (untrimmed), 2.400 mm trimmed, 400 mpm, 30 - 700 gsm, unwind Ø: 1.800 mm, rewind Ø: 1.500 mm, 18 cutting bushings |
|
| F0209 |
2.600 mm, 1.200 mpm, 110 - 280 gsm, unwind Ø: 2.000 mm, rewind Ø: 1.500 mm |
|
| F0263 |
2.610 mm max. reel width, max. reel Ø: 1.350 mm, 800 mpm, 30 - 80 gsm |
|
| F0266 |
2.750 mm working width, unwind Ø: 2.000 mm, 2.000 mpm, 40 - 250 gsm, 4 knives |
|
| F0256 |
2.800 mm, 1.600 mpm, 60 - 125 gsm, 6 knives, Vari Dur |
|
| F0233 |
2.900 mm, 1.800 mpm, 90 - 200 gsm, unwind Ø: max. 2.500 - 2.700 mm, rewind Ø: 1.500 mm, with core cutting machine and transport equipment |
|
| F0257 |
3.800 mm, 3.500 mpm, 60 - 250 gsm, Vari Plus |
|
| F0240 |
5.400 mm (trimmed), 2.200 mpm, 50 - 110 gsm, Jagenberg, Vari-Top |
|
| F0239 |
5.500 mm = useful trimmed width, 2.200 mpm (max), 50 - 110 gsm, unwind Ø: 2.500 mm, rewind Ø: 1.500 mm, Jagenberg, Vari-Roll |
|
| F0166 |
7.060 mm, 1.800 mpm, 80 - 180 gsm, Beloit |
|
| F0268 |
Rereeler, Restatic |
|
F1 - CROSS CUTTER
| F1180 |
1.250 mm, 30 - 40 mpm, 150 - 700 gsm, finished reels: 1.250 mm x 1.500 mm Ø |
|
| F1129 |
1.320 mm, Senator 132, guillotine |
|
| F1110 |
1.400 mm, 300 mpm, 50 - 450 gsm, Bielomatik |
|
| F1174 |
1.650 mm, 250 mpm, 90 - 400 gsm, knife load: 1.050 gsm, Synchro 165 |
|
| F1182 |
1.850 mm, Flat-bed cutting unit, Schneider, model 185, complete unit |
|
| F1175 |
1.950 mm, 30 mpm, 90 - 400 gsm, knife load: 1.050 gsm, 5 longitudinal cutting knives, model: Synchro 321, Jagenberg |
|
| F1173 |
2.200 mm, 250 mpm, 65 - 400 gsm, 5 longitudinal knives, 2 cross-cutting cylinders, 6 unwind stands |
|
| F1176 |
2.200 mm, 250 mpm, 65 - 400 gsm, 5 longitudinal knives, 4 + 4 unwind stands, Synchro 32/215 |
|
| F1177 |
2.200 mm, 300 mpm, 60 - 400 gsm, knife load: 600 gsm, 2 x 8 unwind stands built as carousel, Synchro AS321 |
|
| F1178 |
2.200 mm, 400 mpm, 90 - 120 gsm, 5 longitudinal knives, 2 cross-cutting knives, knife load: 1.050 gsm, 6 unwind stands, Synchro 2000 DD |
|
| F1179 |
Sheet cutter, type: 4544, capacity: 3 - 8 t/h, with automatic destacking unit, Schneider Engineering, 2005 |
|
| F1181 |
Sheet cutter, type: 4553, capacity: 5 - 12 t/h, 350 mpm, with ejection belt for paper scraps, Schneider Engineering, 2005 |
|
F3 - DIFFERENT MACHINES |
| F3010V |
Extremultus drive belt, Siegling, endless, L40 x 4.500 x 170 mm |
|
| F3128V |
Reel wrapping line, Kleinewefers, reel width: 425 - 3.200 mm, Ø: 750 - 1.525 mm, weight: 200 - 6.000 kg, 75 reels/h, wrapping material: kraft paper |
|
| F3272V |
Reel wrapping unit, Thiessen / Trancel, reel dimensions: 2.850 mm x 1.500 mm Ø, weight: max. 7.000 kg, 2 wrapping stations, 1 x film, 1 x wrapping paper |
|
| F3247V |
Reel wrapping unit, reel width: 500 - 1.400 mm, reel Ø: 800 - 1.200 mm, weight: 2.000 kg, capacity: 34 reels/h, labelling: 44 reels/h, wrapping material: PE-laminated packaging paper, kraftliner + PE |
|
| F3277V |
Ream wrapping machine, Wrapmatic, ream wrapping unit DIN A4 - complete line |
|
| F3289V |
Reel splitting machine, max. reel width 1.500 mm, reel Ø 1.100 mm |
|
| F3313V |
Reel splitting machine, RS 150/370, reel width max: 3.700 mm, reels Ø max 1.500 mm, cutting force: 40 t |
|
| F3285V |
Reel splitting machine, Klanke, type: RGS 35, cutting force: 50 t, knife width: 2.000 mm, cutting width: max. 1.800 mm, reel Ø = 1.600 mm, capacity: 3 - 8 t/h |
|
| F3275V |
Pallet wrapping line, working width: 1.200 mm (Euro pallet width), foil wrapping unit, 2 foil wrapping stations with 2 foil shrink ovens, strapping machine Signode |
|
| F3150V |
Label printing machine, PW-250, Labelmen, face: 250 mm, 2 printer inking units |
|
| F3293V |
Press for edge trimming, type: MKM 3500, pressing capacity: 350 kN, 275 m3/h, cycle time: 32 sec, feeding height: max. 1.230 mm, feeding opening: 2.200 mm l x 1.800 mm w x 830 mm h, incl. tilting device and 2 press container |
|
| F3201V |
Channel baling press, Avos 1810, Avermann, bale weight: max. 800 kg, throughput: 12 - 23 t/h, pressing capacity: 100 t, feeding opening: 1.800 mm x 1.000 mm, channel size: 1.100 mm w x 750 mm h |
|
| F3202V |
Channel baling press, Avos 88-11/30, Avermann, bale size: 800 mm x 550 mm, bale weight max.: 250 kg, throughput: up to 94 m3/h (theoretically), pressing capacity 30 t, feeding opening: 800 mm x 800 mm |
|
| F3203V |
Channel baling press, BHC 110 K, Bollergraaf, bale weights: up to approx. 1.300 kg, feeding opening: 1.600 mm x 1.100 mm, channel size: 1.100 mm x 1.100 mm, binding: 5-fold vertically + 5-fold horizontally, incl. a front pressure plate lock for simple com |
|
| F3291V |
Channel baling press, Paal, type: LIKON 110/100M |
|
| F3317V |
Baling press, bale size: 800 x 1.000 mm, bale length: 1.000 - 2.000 mm, bale weight (at 2.000 mm l): 600 - 825 kg |
|
| F3204V |
Baling press, HBC 100, Bollegraaf, bale size: 1.100 mm x 720 mm, bale weight: 550 - 800 kg, pressing capacity main press: 100 t, pressing capacity prepress: 50 t, feeding opening: 1.600 mm x 1.100 mm |
|
| F3205V |
Baling press, HBC 110, Bollegraaf, bale weight: up to approx. 1.300 kg, pressing capacity: 100 t, specific pressing capacity: 8,26 kg/cm2, feeding opening: 1.600 mm x 1.100 mm, channel size: 1.100 mm x 1.100 mm |
|
| F3206V |
Baling press, DKBP 150, Disan, pressing capacity: 150 - 170 t, pressing pressure: max. 300 bar, incl. conveyor |
|
| F3207V |
Baling press, 5000 V 5, Europress, bale size: 730 mm x 1.040 mm, throughput: 180 - 220 m3/h, pressing capacity: 50 t, driving power: 22 kW, feeding opening: 1.250 mm x 1.100 mm, channel size: 730 mm x 1.040 mm |
|
| F3271V |
Bale press, HSM, 500 VL, pressing pressure: 540 kN, bale size: 1.200 x 1.200 x 1.200 mm, bale weight: 400 - 470 kg |
|
| F3303V |
Baling press, HSM, type: AKA 14 Kontinuo, bale size: 700 x 600 x 700 mm (l x w x h), pressing force: 160 kN, 0,8 t/h, feed chute: 650 x 650 mm |
|
| F3185V |
Baling press, AK 807, HSM, bale length: 400 / 600 mm, bale weight: 30 - 60 kg (with 600 mm), pressure: 82 kN |
|
| F3208V |
Baling press, VK 1210, HSM, bulk weight: approx. 2,5 t/h, bale weight: 90 - 200 kg, throughput: up to 127 m3/h (theoretically), pressing capacity: 160 kN, 16 t, nominal power: 9,2 kW, idle cycle time: 9,1 sec., channel size: 700 mm w x 500 mm h, pump capa |
|
| F3209V |
Baling press, VK 4012, HSM, bale size: approx. 720 mm x 900 mm x 600 - 1.200 mm length, throughput with a bulk weight of 40 kg/m3: max. approx. 12,8 t/h, pressing capacity: 45 t, driving power: 22 kW, feeding opening: 1.000 mm x 650 mm, channel size: 720 |
|
| F3294V |
Baling press, HSM, VK 42/80, pressing force: 42 t, channel size: approx. 700 x 800 mm (W x H), tying: 4-fold horizontal, feed opening: 800 x 650 mm |
|
| F3321V |
Baling press, 950/80 AT, Jovisa, pressing capacity: 80 t, bale size: 710 mm width x 980 mm height x 2.200 mm length, incl. spare parts |
|
| F3298V |
Baling press, Kampwerth, HPK 20/40, bale size: 700 mm x 750 mm x length, channel size: 700 x 750, feed opening: 1,200 x 700 mm, pressing force: 40 t, specific pressing force 765 kN/m2, drive power: 15 kW |
|
| F3210V |
Baling press, 111 AS, MAC, pressing capacity: 170 t, driving power: 150 mHP / 2 x 55 kW, lifts per minute: 5, feeding opening: 2.100 mm x 1.020 mm, channel size: 1.100 mm x 1.100 mm, capacity of loading chamber: 2,54 m3, binding: 5-fold horizontally |
|
| F3251V |
Baling press, Pacomat 1 S, bale size: 80 x 80 cm, length variable: 100 - 120 cm, weight: up to 700 kg, incl. dust removal |
|
| F3295V |
Baling press, Pacomat I-35, capacity: 85 m³/h, bale format: 700 x 700, feed opening: 800 x 620 mm, pressing force: 35 t, specific pressing force: 7.14 kg/cm², drive power: 22.0 kW, wire feed-through on the right-hand side when viewed in pressing direction |
|
| F3226V |
Baling press, Pacomat II, throughput: approx. 115 m3/h, driving power: 18,5 kW, feeding opening: 1.000 mm x 650 mm, channel size: 1.000 mm x 700 mm (h x w) |
|
| F3296V |
Baling press, Pacomat IS, throughput capacity: 80 m³/h, channel size: 700 x 700, feed opening: 800 x 650 mm, pressing force: 27 t, specific pressing force: 5.51 kg/cm², drive power: 18.5 kW, with additional manual feed hopper, wire feed-through on the lef |
|
| F3223V |
Baling press, Pacomat IS, throughput: up to 100 m3/h, pressing pressure: 35 t, driving power: 22 kW, feeding opening: 800 mm x 650 mm, channel size: 700 mm x 700 mm |
|
| F3227V |
Baling press, Pacomat IIS, bale weight up to: approx. 450 kg (depending on pressed material and bale length), throughput: 230 m3/h under operational conditions, pressing capacity: 35 t / 350 kN, driving power: 45 kW, feeding opening: approx. 1.000 x 650 m |
|
| F3224V |
Baling press, Pacomat IV, throughput: up to 135 m3/h, pressing pressure: 50 t, driving power: 30 kW, feeding opening: 1.250 mm x 950 mm, channel size: 700 mm x 1.000 mm (h x w) |
|
| F3225V |
Baling press, Pacomat V, bale size: 700 mm x 1.000 mm x length in mm, bale weight: up to 500 kg, throughput: approx. 240 m3/h, driving power: 45 kW, feeding opening: 1.250 mm x 950 mm, binding: 3-fold horizontally |
|
| F3280V |
Baling press, Paal Konti 50, bale size: approx. 700 x 700 mm (variable length), bale weight: variable, depending on the material, capacity: approx. 180 m³/h loose material, press power: approx. 35 t, for pressing small pieced recycled material, dimensions |
|
| F3211V |
Baling press, Paal, Konti 125, bale size: approx. 700 mm x 1.000 mm x adjustable length, bale weight: up to approx. 450 kg (depending on pressed material and bale length), throughput: with a bulk weight of 35 kg/m3 supermarket paper: approx. 5,8 t/h, with |
|
| F3213V |
Baling press, Paal, Konti 200 C, bale weight: 425 - 550 kg (depending on pressed material and bale length), throughput: up to 200 m3/h, with a bulk weight of 35 kg/m3 piled supermarket paper: approx. 7,35 t/h, with 60 kg/m3 mixed paper: approx. 12,0 t/h, |
|
| F3214V |
Baling press, Paal, Konti 200 C, bale weight: 425 - 550 kg (depending on pressed material and bale length), throughput: up to 200 m3/h, with a bulk weight of 35 kg/m3 piled supermarket paper: approx. 7,35 t/h, with 60 kg/m3 mixed paper: approx. 12,0 t/h, |
|
| F3215V |
Baling press, Paal, Konti 200 C (k), bale weight: 425 - 550 kg (depending on pressed material and bale length), throughput: with a bulk weight of 20 kg/m3 loose supermarket paper: approx. 3 t/h, with 35 kg/m3 piled supermarket paper: approx. 5 t/h, with 6 |
|
| F3216V |
Baling press, Paal, Konti 200 C / k, bale size: 750 mm x 1.100 mm, bale weights: up to approx. 600 kg, throughput under working conditions: up to 275 m3/h, pressing capacity: 65 t, driving power: 1 x 45 kW + 1 x 30 kW, feeding opening: 1.020 mm x 1.550 mm |
|
| F3233V |
Baling press, Paal, Konti 600C, bale size: 1.100 mm x 1.100 mm x length in mm, bale weight: approx. 700 - 1.000 kg (depending on pressed material and bale length), throughput: approx. 510 m3/h, pressing pressure: 125 t, feeding opening: 2.000 mm x 1.020 m |
|
| F3235V |
Baling press, Paal, Konti 700 F/K, bale size: 1.100 mm x 1.100 mm x length in mm, throughput: approx. 650 m3/h, pressing pressure: 170 t, feeding opening: 2.000 mm x 1.020 mm reducible by adjustable position of pressure plate, binding: 5-fold vertically w |
|
| F3302V |
Baling press, Paal, Konti X 700 J, pressing force: 1.940 kN / 198 t at 300 bar, specific pressing force: 160 N/cm², bale size: 1.100 x 1.100 mm length, feed opening: 2.000 x 1.020 mm, incl. new press feed conveyor, incl. automatic 4-fold cross strapping |
|
| F3245V |
Baling press, LP50EH 2, Presona, bale weight: up to 550 kg, throughput: 340 m3/h, pressing capacity: 50 t (6,31 kg/cm2), feeding opening: 1.250 mm x 1.100 mm, channel size: 720 mm x 1.100 mm |
|
| F3300V |
Baling press, SACRIA, SAPHIR 340 AT, throughput capacity: approx. 90 m³/h, bale weights: up to approx. 300-350 kg, channel size: 900 x 800 mm (H x W), feed opening: 1,250 x 1,100 mm, pressing force 40 t, specific pressing force 5.10 kg/cm², tying: 4-fold |
|
| F3301V |
Baling press, UnoTech, UPAMAT 40 H3, throughput capacity: approx. 90 m³/h, bale weights: up to approx. 300-350 kg, channel size: 900 x 800 mm (H x W), feed opening: 1,250 x 1,100 mm, pressing force 40 t, specific pressing force 5.10 kg/cm², tying: 4-fold |
|
| F3312V |
Stretch foil reel wrapping machine, reel width: 500 - 2.400 mm, reel weight: 200 - 5.000 kg, wrapping material: foil, 15 - 20 reels |
|
| F3283V |
Foil wrapping machine, Reker, dimensions of pallets: width: min. 500 mm / max. 1.400 mm, length: min. 500 mm / max. 1.800 mm, height: min. 600 mm / max. 1.750 mm, capacity: 30 pallets/h, incl. transport belts and shrinkage oven |
|
| F3270V |
Foil wrapping machine, minipack, Sealmatic 79E |
|
| F3267V |
Wrapping machine, pack length: 100 - 250 mm, pack width: 100 - 250 mm, max. capacity: 80 pack/min., Heino Ilsemann NW 6 |
|
| F3269V |
Horizontal wrapping machine, PFM S.p.A. Mistral BB, label dispenser Pago, double unwind, product length: min. 50 mm, width: max. 320 mm |
|
| F3268V |
Automatic wrapping machine, Beck MP Pico |
|
| F3274V |
Wrapping machine, G&P Confezionatrice GP 20, full film wrapping machine, manual feed |
|
| F3279V |
Pile turner, model E 210, max. load: 2.000 kg |
|
| F3281V |
Transfer unit, Schneider, model: 3044 - complete, 1 destacker, 1 restacker |
|
| F3166V |
Core saw, TM 50, Beloit |
|
| F3246V |
Core cutting unit, Core Link - fully automatic, core Ø: 76 and 100 mm, core length: max. 2.850 mm, min. 300 mm, 1 batch: 6 cores with Ø: 76 mm, yields: 30 batches/h - complete unit |
|
| F3278V |
Core cutting machine, Corelink, CL610, with accessories |
|
| F3284V |
Core splicer, Corelink, CL 610, medium-sized, automatable core RECYCLING system, core length input: 300 - 2.000 mm, core length output: 1.000 - 3.000 mm => 70 - 80 % reduction in new-core requirement |
|
| F3252V |
Reel splitter, Bronneberg, G 25, reel width 1.500 mm x Ø 1.500 mm |
|
| F3287V |
Stock chest, 2 × 35 m³, 1 × 60 m³, machine chests with horizontal agitator. Steel lined with V4A stainless steel |
|
| F3286V |
Stainless steel chest, 120 m³, with Escher Wyss Economix, magnetic separator and pump |
|
| F3288V |
Handling robot, 2001, with robot arm, printer, turning device and loading unit - for 2 sheets simultaneously |
|
| F3253V |
Modular gable hall consisting of 5 halls with a total area of 8.520 m2, newworthy, year of manufacture: 2020 |
|
| F3254V |
Compressor |
|
| F3297V |
Gas Chromatograph + Autosampler 32/122, Agilent Hewlett-Packard + Gerstel, 5890 Series 2 + TDS 3 + TDS/TDU/ Alex |
|
| F3217V |
Frequency converter, type: 134H9178, Danfoss |
|
| F3157V |
Clamp for fork lift, HRK 1518, E.L.M. Kragelund |
|
| F3305V |
Hall sweeper, Wilms, KS 850 E, capacity: 3.400 m2/h, v = 4 km/h |
|
| F3250V |
Dust extraction device / suction device, Donaldson, UMA 456 K11 |
|
| F3141V |
Industrial vacuum system, DS 2520 M-B1, Ruwac, voltage: 400 V, power: 5,5 kW |
|
| F3138V |
Valve, DN 300, Lohse, pneumatic, overhauled |
|
| F3276V |
Slide valve, Lohse, DN 300, double-acting pneumatic cylinder VM 300, brand new - unused |
|
| F3290V |
6ES5944-7UB21, Siemens, spare part SIMATIC S5, CPU 944 central processing unit for S5-115U with 2 interfaces |
|
| F3292V |
6ES5318-8MA12, Siemens, IM318, CR interface module for ET100, spare part SIMATIC S5, connection 318 for ET 100U with connector |
|
P0 - BOILER HOUSE, TURBINES, GENERATORS
| P0027 |
5 t/h, 9 bar, boiler with gas burner 5 MW, 1997 |
|
| P0028 |
9 t/h (20.000 lbs/h), 10 bar (150 PSI), boiler |
|
| P0037 |
11,5 bar, fresh steam temperature: 186 °C, ETT turbine with generator, capacity of generator: 265 - 300 kW |
|
| P0039 |
13 bar permissible operating pressure, capacity: 20 t/h, boiler heating surface: 395 m2, Standardkessel Duisburg, fuel: natural gas or heating oil |
|
| P0024 |
22 t/h, 40 bar, Babcock, boiler |
|
| P0034 |
38,5 t/h, capacity: 6 MW, 7,5 MVA, working pressure: 900 PSIG, working temperature: 482 °C, steam turbine, AEG |
|
| P0035 |
44,2 t/h, capacity: 6 MW, steam turbine, AEG |
|
| P0036 |
1400 kW, gas boiler with burner, Viessmann |
|
Z0 - PULP PLANTS AND MACHINERY FOR THE PULP PRODUCTION
| Z0025 |
200 tpd, HC bleaching unit, double-wire presses 4.250 mm and 3.800 mm, HC mixing unit, dosing station for chemicals, HC bleaching tower with 6 feeding screws |
|
| Z0027 |
CTMP plant, 3.500 mm Ø x 5.000 mm length, Andritz, Bauer, Metso ..., 2 Bauer double-disc refiner 420 A 40, 2 screw presses (80 & 120 tpd), Jylhävaara refiner SD48A, 4 Sunds thickener MFA 3550 |
|
|
