M0 - PAPER MACHINES

M0306 1.650 mm, 300 mpm, 60 - 200 gsm, 22 drying cylinders, 2 presses, MG cylinder Ø: 3.600 mm
M0194 2.100 mm, 100 - 150 mpm, 60 - 120 gsm, 25 tpd, 10 drying cylinders, 3 presses, MG cylinder, calander, rewinder slitter, corrugated medium
M0427 2.100 mm, 5 - 120 mpm, 90 - 450 gsm, 20 - 25 tpd, filter papers, weed fleece
M0411 2.200 mm, 90 - 300 gsm, 70 tpd, 20 drying cylinders (d = 1.250 mm) + 2 cooling cylinders, 2 presses
M0031 2.250 mm (untrimmed at popereel), 300 mpm, 120 - 450 gsm, 110 tpd, drying cylinders: 16 (1,5 m), 2 (1,25 m), MG (3,6 m), 7 (1,5 m), 5 (1,25 m), core board
M0408 2.300 mm, 650 mpm, 40 - 200 gsm, 70 - 180 tpd
M0376 2.360 mm, 400 mpm, 150 tpd
M0397 2.400 mm trimmed, 140 mpm, 112 - 250 gsm, 50 tpd
M0032 2.450 mm at popereel, 420 mpm, 180 - 630 gsm, approx. 180 tpd (60.000 tpa), 22 pre-drying cylinders / 13 after-drying cylinders, shoe press, core board
M0432 2.500 mm, 700 mpm, 130 - 240 gsm, up to 300 tpd, size press, shoe press
M0404 2.500 mm, 1.100 mpm, 110 - 180 gsm, 400 tpd, 35 + 18 drying cylinders, with shoe press, corrugated medium, fluting
M0429 2.550 mm, 500 mpm, 60 - 200 gsm, 70 tpd, white or brown papers
M0401 2.560 mm, up to 1.100 mpm, 90 - 180 gsm, up to 400 tpd, 57 drying cylinders, 9 bar, 3 presses, 3. press = shoe press
M0385 2.600 mm working width, 2.540 mm at Popereel, 80 - 200 gsm, up to 75 tpd, 2 presses, packaging paper, fluting
M0414 2.650 mm (trimmed), 1.000 mpm, 380 tpd, shoe press
M0399 2.800 mm, 700 mpm, 40 - 160 gsm, 130 tpd, 36 + 17 after-drying cylinders
M0400 2.800 mm, 700 mpm, 40 - 160 gsm, 130 tpd, 19/17 drying cylinders, Ø: 1.522 mm
M0363 2.850 mm, 780 mpm
M0320 3.260 mm, 360 mpm, 80 - 200 gsm, 100 tpd, 23 drying cylinders, 3 presses, brown papers
M0425 3.640 mm, 950 mpm, 50–150 gsm, up to 360 tpd, with compact press and speed sizer
M0364 3.750 mm (3.850 mm), 910 mpm
M0428 4.950 mm max. trimmed, up to 900 mpm, 65–165 gsm, up to 480 tpd, with compact press and speed sizer
M0413 5.280 mm, 1.100 mpm, 35 - 80 gsm, 320 tpd, 52 drying cylinders (6 bar), tri-nip press
M0407 5.690 mm, 1.000 mpm, 46 - 120 gsm, 480 tpd, 34 / 16 drying cylinders, tri-nip press, copy paper, offset paper
M0426 5.900 mm, 1.400 mpm
M0386 6.585 mm, 1.350 - 1.500 mpm, 60 - 100 gsm, 235 tpd
M0394 7.040 mm, 1.510 mpm, 29 - 52 gsm
M0416 7.500 mm (untrimmed), 1.200 mpm, 39 - 90 gsm (finished paper), up to 570 tpd
M0388 7.840 mm, 1.400 mpm, 47 - 80 gsm, 265 tpd
M0395 8.260 mm, 1.650 mpm, 52 gsm
M0396 8.350 mm, 1.550 mpm, 44 - 60 gsm, 2 presses - Sympress, shoe press


M1 - TISSUE MACHINES

M1049 2.000 mm (wire width), 5.000 t/y, compl. tissue machine with de-inking, power house, rewinder slitter
M1096 2.350 mm, 18 - 90 gsm, 30 - 46 tpd, MG paper machine
M1123 2.550 mm (untrimmed), 900 mpm, 14 - 40 gsm, 30 tpd, Ø: 3.600 mm, tissue machine
M1115 2.550 mm, 1.200 mpm, 15,5 - 35 gsm, 60 tpd, Yankee Ø: 3.600 mm
M1114 2.550 mm, 1.700 mpm, 14 - 35 gsm, 90 tpd, Yankee Ø: 4.600 mm, Crescent Former
M1125 2.620 mm, 800 mpm, 50 tpd, Erwepa, re-reeler Jagenberg with 2 unwind stands
M1079 2.700 mm, 300 mpm, 14 - 100 gsm, 25 - 30 tpd, compl. plant
M1101 2.750 mm, 13,5 gsm, 70 tpd
M1126 3.400 mm, 1.450 mpm, 74 tpd, Beloit
M1122 3.540 mm (ww reduced currently to 2.800 mm), 2.000 mpm, 19 - 30 gsm, jumbo rolls, 40.000 MT/y, max. reel width: 2.800 mm, 1 and 2 layer, jumbo rolls toilet paper and kitchen paper
M1097 3.600 mm, 55 - 65 tpd, kraft and bag papers
M1121 4.400 mm (at popereel), 17 - 150 gsm, 16.900 tpy (17 gsm), MG tissue machine
M1098 4.500 mm (at popereel), 350 - 700 mpm, 18 - 60 gsm, 40 - 70 tpd


M2 / M3 - BOARD & CARDBOARD MACHINES

M2053 4.000 mm (at popereel), up to 500 mpm, 250 - 480 gsm, up to 700 tpd, drying cylinders: 37/30 (5 bar), MG cylinder: 4.500 mm, with shoe press
M3017 1.200 mm, 800 - 5.000 gsm, 12 tpd, solid board, gray board for industry
M3022 1.700 mm, 40 mpm, up to 1.800 gsm, board
M3021 2.700 mm, 700 - 3.600 gsm, Schild, flat-bed drier, 1 press 400 bar
M3016 2.850 mm, 1.000 - 2.000 gsm, 36 tpd, cardboard machine for gray cardboard


M4 - WET SECTION

Head box

M4062H 2.500 mm (ow), 10.000 lpm, 480 mpm, 40 - 120 gsm, diffusor head box
M4050H 2.650 mm (ow), throughput: 15.000 - 20.000 lpm
M4085H 2.900 mm clear wire width, 8.200 - 13.000 lpm, 50 - 160 gsm, 200 - 400 mpm
M4083H 3.229 mm, wire width: 3.350 mm, 280 - 1.300 mpm, 38 - 250 gsm, throughput: 20.500 - 36.800 lpm, 0,35 - 0,8 %, with pulsation damper & dilution water distributor
M4066H 4.550 mm, 15.000 - 37.500 lpm, 100 - 700 mpm, 40 - 150 gsm
M4084H 7.580 mm (ow), 1.200 - 1.400 mpm, 32 - 50 gsm, Master Jet II, Voith

Wire section, cylinder moulds and cylinder mould formers

M4065S 2.550 mm, 900 mpm, 80 - 180 gsm, with top wire, up to and including shoe press and spare parts
M4066S 2.650 mm at popereel, up to 1.100 mpm, 100 - 200 gsm, with top wire, up to and including shoe press
M4068S 3.000 mm face x 800 mm Ø, dandy roll, Finckh, stainless steel, with spare dandy roll
M4067S 3.050 mm wire width, 11.943 mm wire length, 50 - 200 gsm, up to 600 mpm, breast roll Ø: 528 mm, suction couch roll Ø: 815 mm, drive in paper running direction: left
M4064S 5.850 mm (ww), 1.250 mpm, 70 - 210 gsm, with shoe press in stainless steel

Press section

M4051P 2.800 mm face x 900 mm Ø, nip pressure: 1.200 kN/m, speed: up to 250 mpm, rolls Ø: 900/900 mm
M4085P 2.970 mm face, drive: left (in paper running direction), nip pressure: 50/70/90 kN/m, 3 presses, 1st press: suction press
M4042P 5.200 mm wire width, 350 - 520 mpm, 90 - 200 gsm, 5.700 mm x 610 mm (pick-up roll), with 2 suction zones, 5.400 mm x 980 mm / 1.050 mm (1st press roll), 65 kN/m, 5.480 mm x 1.212 mm (2nd press) = jumbo press = 180 kN/m, 5.480 mm x 1.212 mm (3rd press) = j
M4049P 5.900 mm face x 1.230 mm Ø, press roll, Voith, TopRock, bearing center distance: 6.850 mm
M4084P 6.210 mm face x 1.100 mm Ø, dimensions press roll, drive: right (in paper running direction), shoe press for TM, 16 - 30 gsm, up to 2.000 mpm, nip pressure: 170 kN/m
M4040P 7.020 mm wire width, 1.200 mpm, incl. 12 felt guiding rolls, Valmet


M5 - DRYING SECTION

M5064 1.500 mm Ø, 1,5 bar, up to 800 mpm, 31 + 3 cooling cylinders
M5059 2.800 mm face x 1.500 mm Ø, 2 drying cylinders
M5061 2.850 mm x 1.500 mm Ø, 10 x Voith, 44 x Valmet, 1996, 1999, 2008, operating pressure: 4,5 bar
M5065 5.300 mm trimmed, 900 mpm, Ø: 1.500 mm, 5 bar, 44 drying cylinders


M6 - POPEREELS, CALANDER AND SUPERCALANDER

Popereel

M6033P 2.950 mm max. working width, 50 - 200 gsm, 400 mpm
M6020P 5.040 mm, 260 mpm, 180 - 560 gsm, rewind Ø: 1.200 mm

Calander

M6050G 1.400 mm, 120 t, 2 rolls, Ø: 550 mm, for cardboard
M6049G 1.550 mm, 2 rolls, Ø: 500 mm, for cardboard
M6028G 1.600 mm, width of paper web: 1.800 mm, 2 rolls, Küsters
M6053G 2.400 mm, width of paper web: 1.200 - 2.200 mm, Küsters, 250 mpm, 30 - 300 gsm, nip pressure: 20 - 200 kN/m, drive left in running direction
M6041G 2.400 mm, 400 mpm, 30 - 700 gsm, 2 rolls
M6046G 2.650 mm, up to 350 mpm, 4 rolls, Bruderhaus
M6059G 2.800 mm face, 1.300 - 2.650 mm, 10 - 200 kN/m, 400 mpm, 60 - 200 gsm, Küsters, MOL calander

Supercalander

M6029S 3.800 mm, 800 mpm, 60 - 250 gsm, 10 rolls, with S-rolls, Kleinewefers
M6030S 3.800 mm, 300 N/mm, 60 - 250 gsm, 12 rolls, with heatable rolls, Kleinewefers
M6026S 5.400 mm, 800 mpm, 40 - 100 gsm, 12 rolls


M7 - COATING SECTIONS, SIZE PRESSES

Coating sections

M7080S Pilot plant, Curtain Coater - newworthy
M7071S Dosing station consisting of 3 GFK tanks and corresponding measuring devices
M7072S Guar gum dissolving unit with Ecomix agitator, filling hopper and pumps


M8 - MG – CYLINDER

M8001 1.900 mm x 3.200 mm, 3 bar, Escher Wyss
M8023 2.500 mm x 2.500 mm, Carcano
M8026 3.030 mm x 3.600 mm, Over, with hood
M8028 3.100 mm x 3.600 mm, Over
M8027 3.200 mm x 3.600 mm, Yankee cylinder
M8025 3.850 mm x 4.200 mm, 5 bar, Escher Wyss
M8015 4.600 mm x 4.250 mm, 600 mpm, working pressure: 8 bar, complete section
M8029 5.240 mm paper web width at the Yankee, production of TM: 150 tpd, drying capacity of the hood: 8,1 t/h, working temperature: up to 250 °C, hood, latest technology