K0 - STOCK PUMPS
K0004 |
T81-150H4LB4B, Egger, 1.500 lpm, 26 mWC |
|
K0003 |
A31-125, Sulzer, 6.300 lpm, 35 mWC |
|
K0001 |
NB 090 BY, Netzsch 2007, eccentric pump, 60 m3/h |
|
K1 - VACUUM PUMPS
K1001 |
10 E, Voith, 3.600 m3/h, 5 mWC |
|
K1053 |
2 BA 37 14, Elmo |
|
K1025 |
2 BE 355, Elmo |
|
K1060 |
2BE1 353-0BY3, Siemens, Elmo |
|
K1041 |
2BE 1405 - 1 BY3Z F62, Nash Elmo, 33.600 m3/h, 132 kW |
|
K1022 |
2BE2 262 BL 496R-Z, Nash, 2.000 m3/h, 38 kW |
|
K1042 |
2BE2 262 BL 496R-Z, Nash Elmo, 120.000 m3/h, 38 kW |
|
K1030 |
2BE3 500-2BY, Siemens Elmo |
|
K1059 |
2BE4 520, Nash |
|
K1058 |
2BE4 600, Nash |
|
K1006 |
3BE3 300-2BY 4, Nash |
|
K1043 |
RV18, Nash Elmo, 1.916 m3/h, 53 kW |
|
K1021 |
RV18, 1.916 m3/h, 53 kW |
|
K1051 |
901, Northpump, 8.400 m3/h, 0,5 bar |
|
K1057 |
904R1, Nash |
|
K1019 |
CL 302, Nash, 500 - 800 m3/h, with base plate, fittings and motor - newworthy |
|
K1005 |
CL 1001, Nash, water-ring air pump, 1.750 - 1.700 m3/h, 0,2 - 0,5 bar |
|
K1004 |
CL 2002, Nash, water-ring air pump, 3.390 - 2.900 m3/h, 0,4 - 0,8 bar - newworthy |
|
K1026 |
CL 2002, Nash, water-ring air pump, 3.390 - 2.900 m3/h, 0,4 - 0,8 bar |
|
K1046 |
CL 3001, Nash, 5.100 - 4.800 m3/h, 0,2 - 0,6 bar |
|
K1024 |
CL 3002, Nash, 5.000 - 4.300 m3/h, 0,4 - 0,8 bar |
|
K1050 |
CL 4002, Nash, 6.700 - 5.600 m3/h, 0,3 - 0,8 bar |
|
K1049 |
CL 9002, Nash, 16.000 - 14.000 m3/h, 0,3 - 0,7 bar |
|
K1056 |
G 9002, Nash, 14.450 - 15.300 m3/h, 305 - 599 mm Hg |
|
K1054 |
SC 6/7, Nash, capacity: 1.000 - 2.000 m3/h, successor model of the CL pumps |
|
K1055 |
Vectra XL 150, Nash, 250 - 1.800 m3/h, 1.400 - 3.000 mbar |
|
K1039 |
CE 1 405, Cutes, liquid ring vacuum pump (exchangeable with Nash-Elmo 2BE1-405) |
|
K1036 |
CVP 50 M, Cutes, repaired |
|
K1037 |
CVP 50 M, Cutes, repaired |
|
K1031 |
CVP 50 M FCD, Cutes |
|
K1033 |
CVP 50 M FCD, Cutes |
|
K1035 |
CVP 50 M FCD, Cutes |
|
K1032 |
CVP 50 L FCD, Cutes |
|
K1034 |
CVP 50 L FCD, Cutes |
|
K1038 |
CVP 110 L, Cutes, liquid ring vacuum pump (exchangeable with Nash 904S1) |
|
K1048 |
GM 7L, Delta Blower, Aerzen, vacuum blower, 5,42 m3/min |
|
K1011 |
PTK-350, Bialogon, 16.000 lpm, 18 mWC |
|
K1012 |
ZRR-25, Sulzer, 12.600 lpm, 15,5 mWC |
|
K2 - WATER PUMPS
K2010 |
7 m3/h, 118 lpm (delivery rate), 22 kW, KD 208, URACA (Pumpenfabrik Urach) |
|
K2009 |
7 m3/h, 118 lpm (delivery rate), 26 PS, KD 509, URACA (Pumpenfabrik Urach) |
|
K2015 |
20 m3/h, 100 mWC, Andritz, ISO 65 40 250 |
|
K2027 |
31,2 m3/h, 18 mWC, 5,5 kW, Dörr - Oliver, Eimco, 132 S |
|
K2026 |
32 m3/h, 16 mWC, Sulzer |
|
K2019 |
90 m3/h, 1.480 lpm,132 kW, Andritz, S3 260 470 |
|
K2020 |
90 m3/h, 45 mWC, 90 kW, Andritz, S 800 - 470 |
|
K2006 |
109 m3/h, 20 mWC, Sulzer Weise |
|
K2008 |
120 m3/h, 15 mWC, 15 kW, Hannibal |
|
K2022 |
140 m3/h, 18 mWC, spiral casing pump, Vogel, LSN 125-100-200 S1W1 - 1504 |
|
K2014 |
150 m3/h, 10 mWC, Andritz, S125 265.3 |
|
K2013 |
150 m3/h, 30 mWC, Andritz, S125 350 |
|
K2017 |
200 m3/h, 10 mWC, Andritz, S125 - 26.5 |
|
K2021 |
320 - 510 m3/ h, 14 - 28 mWC, Andritz, S 200 - 380 |
|
K2004 |
350 m3/h, 25 mWC, filtrate water, Weise+Monski - 2 pcs. available |
|
K2007 |
415 - 145 m3/h, 28 - 26 mWC, 55 kW, Ahlström, NPP 44-150 |
|
K2012 |
760 m3/h, 12.600 lpm, 15,5 mWC, Sulzer, ZRR-25 |
|
K2011 |
960 m3/h, 16.000 lpm, 18 mWC, Bialogon, PTK-350 |
|
K3 - FAN PUMPS
K3009 |
600 m3/h, Scan, type: BA 250/250 |
|
K3011 |
720 - 2.700 m3/h, delivery height: 9,5 - 51,5 m, Jeumont-Schneider, type: MP 500 |
|
K3007 |
750 m3/h, 44 mWC, Sulzer Weise, type: ZBXII |
|
K3008 |
1.200 m3/h, Scan, type: BA 300/250 |
|
K3010 |
1.620 m3/h, 07 - 22 mWC, 0,38 - 0,80 %, Voith |
|
K3005 |
1.800 m3/h, 18 mWC, Sulzer, type: Z-V50T-2 |
|
K3001 |
3.000 m3/h, Schneider |
|
K3006 |
3.600 m3/h, 58 mWC, Voith, type: DK 40/60 |
|
K3002 |
10.000 m3/h, 75 mWC, Karhula |
|
K4 - LOW-DENSITY CLEANER
K4057 |
Size: 700, Celleco, Albia, 3 stages, 200 tpd |
|
K4044 |
KS 60 R-DG, 2 pcs. stands for cone separators, 60 cone separators each |
|
K4075 |
Cleaner unit, GL & V, 3 + 2 Fibermizer, 9 (Celleco Twister), 4 (Cleanpac 700), 3 (Cleanpac 700), 120 tpd |
|
K4077 |
700 HQ Cleanpac, GLV, 10.300 - 11.500 lpm, 4-stage cleaner unit, 16 / 7 / 4 / 1 cleaner per stage, stock consistency: 0,39 - 0,50 % |
|
K4042 |
KS 160/6 R-DG, 160 lpm per piece, 4 cleaner units with 14 / 15 / 18 / 13 cleaners - complete |
|
K4061 |
KS 160, Voith, 10 / 4 cleaners per stage, 2 stages |
|
K4064 |
KS 160 E / 6E, KS 160 / 6R, 600 lpm/cleaner, Voith, 32 / 8 / 2 cleaners, 3 stages, stock consistency: up to 0,8 % |
|
K4079 |
KS 200 R, 950 lpm/cleaner, Voith, 3 / 1 cleaner per stage, 2 stages + 1 Rejectomat, stock consistency: up to 1,4 % |
|
K4080 |
KS 250 / 3 R, 3.000 lpm/cleaner, Voith, 3 / 1 cleaner per stage, 2 stages + 1 Rejectomat, stock consistency: 0,5 - 0,8 % - complete |
|
K4072 |
LT3, Voith, cleaner unit, 14 / 18 cleaners, 2 stages |
|
K4069 |
Gyroclean, Lamort, 360 - 440 m3/h, stock consistency: 1,5 - 2 % |
|
K4065 |
G 3 L, Lamort, Gyroclean, 240 - 330 m3/h, 30 kW, with pump 1,5 m3/h |
|
K4011 |
GYS, Gyroclean, 198 m3/h, width of slots: 0,05 mm |
|
K4073 |
Cyclotec, cleaner unit, 3 stages |
|
K4074 |
TS 475, RCM Marnate, Rotocleaner |
|
K4043 |
HC5-IS 6.1, 440 - 500 lpm, 2 cleaner units, 7 cleaners each |
|
K4060 |
Cleaner unit, 12 / 1 / 1 cleaners, 3 stages, 432 / 105 / 36 m3/h, stock consistency: up to 1,5 % |
|
K4051 |
Uniflow, Beloit, 400 tpd, cleaner unit, 3 stages, complete with pumps, pipes and internal valves |
|
K4040 |
Uniflow 3/100, Beloit, 80 lpm, 135 lpm/cleaner, number of cleaners: 19, cleaner unit, 2 stages - excellent condition |
|
K4058 |
Uniflow HF, Beloit, 190 lpm/cleaner, 6 stands, totally 200 cleaners |
|
K4059 |
Posiflow 60, Beloit, 265 lpm/cleaner, 14 stands, totally 520 cleaners |
|
K4076 |
Cleaner unit, 2 stages, 1. stage: 4 (5) x low-density cleaners KS 160 E with reject flushing, 2. stage: 1 x low-density cleaner KS 160 R |
|
K5 - VIBRATING SCREENS
K5036 |
0,75 m2, V 1, Finckh |
|
K5034 |
0,75 m2, E 1, Finckh |
|
K5040 |
0,75 m2, 500 K, Voith |
|
K5050 |
1,5 m2, 1000 K, Voith |
|
K5035 |
1,5 m2, E 2, Finckh, perforation: 1,2 mm |
|
K5047 |
1,5 m2, E 2, Finckh |
|
K5052 |
1,5 m2, E 2, Finckh |
|
K5042 |
1,5 m2, Fampa, perforation: 3 mm |
|
K5051 |
1000 S, Voith, perforation: 8 mm, stock consistency: 3 - 5,5 % |
|
K6 - VERTICAL SCREENSVoith |
K6248 |
Size: 1 |
|
K6216 |
Size: 01, Minisorter, throughput: up to 10 tpd, stock consistency: 0,5 - 1 % (final stage screen), screening area: 0,2 m2 |
|
K6302 |
Size: 10 |
|
K6151 |
Size: 3, horizontal screen, throughput: 6.500 - 12.000 lpm, screening area: 2 m2, slots: 0,2 mm, C-bar, chromed |
|
K6273 |
Size: 10, Minisorter, slots: 0,20 mm |
|
K6112 |
Size: 13, 50 tpd, perforation: 2,4 mm |
|
K6231 |
Size: 30, 35.000 lpm, slots: 0,15 mm |
|
K6270 |
Size: 35, 50.000 lpm, slots: 0,15 mm |
|
K6147 |
2-HS size II, horizontal screen, throughput: 60 - 150 tpd, basket: 0,35 mm (60 tpd), perforation: 4,0 mm (150 tpd), stock consistency: 2,5 - 3 %, 30 - 55 kW |
|
K6300 |
CS3-T, Axiguard, throughput: up to 21,5 tpd, slots: 0,2 mm, medium consistency: up to 1,5 %, with milled basket: 1.500 lpm, bar basket: 2.000 lpm |
|
K6060 |
CS3-T, Axiguard, 2 pcs. available, 1 x 0,20 mm, 1 x 0,22 mm |
|
K6350 |
DS200, perforation: 3 mm |
|
K6169 |
Hori 3, with basket, slots: 0,8 mm or 0,15 mm, 0,25 mm, 0,3 mm, 0,5 mm, 0,55 mm available |
|
K6170 |
Hori 3, with basket, perforation: 1,8 mm |
|
K6208 |
MS10, Minisorter, slots: 15 mm, screening area: 0,78 m2 |
|
K6176 |
MS11, Minisorter, throughput: up to 65 tpd, stock consistency: 0,5 - 0,1 % |
|
K6227 |
MS11, Minisorter, throughput: up to 60 tpd, slots: 0,25 mm |
|
K6198 |
MS051, Minisorter, throughput: up to 30 tpd, stock consistency: 0,5 - 0,8 % |
|
K6362 |
MSA05/05, Multiscreen, throughput: up to 3.676 lpm, stock consistency: up to 1,5 %, power requirement: 16 kW, with spare basket |
|
K6250 |
MST05/05WR, Minisorter, throughput: 20 - 35 tpd, slots: 0,15 mm |
|
K6251 |
MSS06/06, Multiscreen, throughput: 100 - 120 tpd, slots: 0,15 mm |
|
K6271 |
OF4-BR, Fractionator, slots: 0,25 mm |
|
K6252 |
OS2 - 2, Omniscreen, throughput: up to 2.000 lpm, stock consistency: 2 - 4,5 %, screening area: 0,41 m2, perforation: 1,2 mm |
|
K6057 |
OS2, Omniscreen, throughput: up to 2.000 lpm, stock consistency: 2 - 4,5 %, screening area: 0,41 m2, perforation: 1 x 0,20 mm, 1 x 0,22 mm |
|
K6301 |
OS2, Omniscreen, throughput: up to 2.000 lpm, stock consistency: 2 - 4,5 %, screening area: 0,41 m2, slots: 0,2 mm |
|
K6272 |
OS2-BR, Omniscreen, slots: 0,25 mm |
|
K6276 |
OS4, Omniscreen, throughput: up to 4.000 lpm, stock consistency: 2 - 4,5 %, screening area: 0,9 m2 |
|
K6058 |
OS4, Omniscreen, throughput: up to 4.000 lpm, stock consistency: 2 - 4,5 %, screening area: 0,9 m2, perforation: 1 x 0,20 mm, 1 x 0,22 mm |
|
K6275 |
OS8, Omniscreen, throughput: up to 8.000 lpm, stock consistency: 2 - 4,5 %, screening area: 1,5 m2 |
|
K6359 |
OS8, Omniscreen, throughput: up to 8.000 lpm, stock consistency: 2 - 4,5 %, screening area: 1,5 m2, perforation: 1 x 0,20 mm, 1 x 0,22 mm |
|
K6230 |
VSI 20 |
|
K6280 |
VSI 23 |
|
K6200 |
VS 30, with slotted basket |
|
Escher Wyss |
K6279 |
CS 130 |
|
K6278 |
K 100L, formerly Finckh |
|
K6228 |
LPD 40, approx. 60 tpd |
|
Valmet - Metso |
K6155 |
CS-40V, Optiscreen, stock consistency: 3 - 5 %, screening area: 0,4 m2, perforation: 2,5 mm |
|
K6353 |
FS-302, Optiscreen, screening area: 3,1 m2, slots: 0,15 mm |
|
K6354 |
MUST 302, throughput: 150 - 180 tpd, screening area: 3,1 m2, slots: 0,15 mm |
|
K6104 |
TAP 120, basket: 2,6 mm or alternatively slots: 0,2 mm, low-density range - 500 hours in operation |
|
K6105 |
Fine screen, screening area: 0,5 m2, perforation: 1,6 mm - less than 500 hours in operation |
|
Kadant - Lamort |
K6157 |
AADS 100 |
|
K6203 |
ADS 7 |
|
K6159 |
C 3, final stage screen, slots: 0,2 mm, motor: 22 kW |
|
K6269 |
CH 3, throughput: 30 - 100 tpd, installed power: 22 - 37 kW |
|
K6267 |
CH 3, throughput: 30 - 100 tpd, installed power: 22 - 37 kW, slots: 0,25 mm |
|
K6015 |
CH 3, throughput: 30 - 100 tpd, installed power: 22 - 37 kW, slots: 0,35 mm |
|
K6124 |
CH 3A, horizontal screen, stainless steel, with perforated basket |
|
K6264 |
CH 7, throughput: 100 - 340 tpd, installed power: 75 - 110 kW, perforation: 2,5 mm |
|
K6285 |
CH 10, throughput: up to 150 tpd, stock consistency: 1 - 1,5 %, installed power: 132 kW, slots: 0,18 mm |
|
K6268 |
CH 10, throughput: 220 - 7.500 tpd, installed power: 132 - 200 kW |
|
K6304 |
CH 10, throughput: 220 - 7.500 tpd, installed power: 132 - 200 kW, slots: 0,18 mm |
|
K6202 |
CHA 25, horizontal screen |
|
K6364 |
SP 400, throughput: up to 200 m3/h |
|
K6363 |
SP 800, throughput: up to 1.300 m3/h |
|
K6138 |
SP 800, throughput: 100 - 110 tpd (depending on the execution of the basket), up to 21.000 lpm (with perforated basket), slots: 0,75 mm, stainless steel, with a very large number of spare parts |
|
K6355 |
SP 800, throughput: 100 - 110 tpd (depending on the execution of the basket), up to 1.300 m3/h (with perforated basket) |
|
K6303 |
SP 1000 |
|
K6243 |
SP 1200, throughput: 200 - 220 tpd (depending on the execution of the basket), up to 33.000 lpm, perforation: 1,8 mm (or: 2,0 mm) - or slots: 0,5 mm |
|
K6172 |
SPH 17, throughput: approx. 126.000 lpm, stock consistency: up to max. 1,5 %, screening area: 21 m2, slots: 0,3 mm, motor rate: 110 kW, this is a final stage screen which is installed directly upstream of the headbox to minimize pulsations in the headbox, |
|
K6156 |
SPN 4, throughput: max. 40 tpd, 5.000 lpm, motor rate: 7,5 kW, for low-density range, stock consistency: 0,5 - 0,8 %, working method: centripetal |
|
K6266 |
SPN 6, throughput: max. 80 tpd, 11.000 lpm, motor rate: 15 kW, slots: 0,25 mm, for low-density range, stock consistency: 0,5 - 0,8 %, working method: centripetal |
|
K6265 |
SPN 12, throughput: up to 360 tpd, 50.000 lpm, motor rate: 55 kW, slots: 0,25 mm, for low-density range, stock consistency: 0,5 - 0,8 %, working method: centripetal |
|
K6158 |
Fine screen, slots: 0,2 mm, motor: 75 kW, 1.000 rpm |
|
K6045 |
Rotor for CH 7 - 2 pcs. available |
|
K6047 |
Rotor for CH 10 |
|
K6048 |
Rotor for SP 600 |
|
K6046 |
K-Rotor for Diabolo D 2 |
|
Andritz |
K6257 |
HB-65, Moduscreen, screening area: 9 m2, as headbox screen directly upstream of the headbox, minimal pulsation and low fibre loss |
|
Finckh |
K6215 |
2 HS, horizontal screen, slots: 0,20 mm |
|
K6110 |
H06, final stage screen, throughput: up to 25 tpd (at a stock consistency of 1 %), up to 2.500 lpm (at a slots width of 0,4 mm), screening area: 0,62 m2, stock consistency: 0,2 - 1,4 %, motor rate: 18,5 kW, slots: 0,45 mm - in excellent condition |
|
Beloit Jones |
K6241 |
MR-18, perforation: 1,4 mm - alternatively: slots 0,25 mm |
|
K6240 |
MR-32, perforation: 1,4 mm |
|
K6242 |
MR-48, slots: 0,25 mm |
|
K6114 |
3.500 lpm, perforation: 2 mm, stock consistency: up to 1,5 % |
|
Various |
K6201 |
C 24 PH, Black Clawson, 75 kW |
|
K6356 |
APS FS 4, Ahlström, perforation: 3 mm, stock consistency: 4 - 7 % |
|
K6222 |
3232-H, Hunter, throughput: max. 20.180 lpm, slots: 0,35 mm, stock consistency: up to 0,47 % |
|
K6223 |
2015/K/S, Hunter, throughput: max. 2.000 lpm, slots: 0,35 mm |
|
K6220 |
ECT 2, Toschi |
|
K6221 |
VS 3.1, Toschi, final stage screen |
|
K6294 |
TL, Tampella |
|
Wire baskets |
K6311 |
Slots: 0,5 mm, for SP 600, Lamort |
|
K6323 |
Slots: 0,5 mm, new, for VSi10, VSi11, VSi12, Voith |
|
K6188 |
Slots: 0,12 mm, new, for CH 5, Lamort |
|
K6189 |
Slots: 0,12 mm, new, for CH 5, Lamort |
|
K6190 |
Slots: 0,12 mm, new, for CH 5, Lamort |
|
K6313 |
Slots: 0,15 mm, C-Bar, for VSi10, VSi11, VSi12, Voith |
|
K6309 |
Slots: 0,15 mm, C-Bar, for VSi20, VSi21, VSi22, Voith |
|
K6314 |
Slots: 0,15 mm, C-Bar, for VSi30, VSi31, VSi32, Voith |
|
K6325 |
Slots: 0,15 mm, C-Bar, for VSi30, VSi31 and MS12/10, Voith |
|
K6335 |
Slots: 0,15 mm, C-Bar, SE, for VSi35 and MS12/15, Voith |
|
K6312 |
Slots: 0,15 mm, C-Bar, for Minisorter MS050, Voith |
|
K6331 |
Slots: 0,15 mm, C-Bar, CR 150, for MultiScreen MSS12/12, Voith |
|
K6333 |
Slots: 0,15 mm, C-Bar, SE, CR 80, for MSX08/05, Voith |
|
K6334 |
Slots: 0,15 mm, C-Bar, SE, N CR 08, for Axiguard CS3-T, Voith |
|
K6329 |
Slots: 0,15 mm, QE, CR08 for MSS12/12, Voith |
|
K6328 |
Slots: 0,15 mm, C-Bar, bar basket for SS33D or MSM12/05D |
|
K6191 |
Slots: 0,18 mm, new, for CH 5, Lamort |
|
K6192 |
Slots: 0,18 mm, new, for CH 5, Lamort |
|
K6324 |
Slots: 0,18 mm, profile angle: 12°, profile depth: 0,5 mm, profile bar: 10 x 2,5 mm, stainless steel, bar basket for VSi20, VSi21, VSi22, Voith |
|
K6327 |
Slots: 0,20 mm, C-Bar, bar basket for VSi35 and MS12/15, Voith |
|
K6310 |
Slots: 0,20 mm, for SP 1000, Lamort |
|
K6194 |
Slots: 0,22 mm, new, for CH 5, Lamort |
|
K6183 |
Slots: 0,25 mm, new, for CH 10, Lamort |
|
K6315 |
Slots: 0,25 mm, for Diabolo, Lamort |
|
K6306 |
Slots: 0,25 mm, ATF |
|
K6336 |
Slots: 0,25 mm, SE, A CR80, for MSA06/06 0,25 A CR80, Voith |
|
K6305 |
Slots: 0,35 mm, Voith |
|
K6332 |
Slots: 0,35 mm, C-Bar, QH, CR 80, for VSi30, VSi31 and MS12/10, Voith |
|
K6338 |
Slots: 0,35 mm, C-Bar, SH, G CR, for VSi20, VSi21 and MSS08/0, Voith |
|
K6307 |
Slots: 0,35 mm, Fiedler |
|
K6308 |
Slots: 0,45 mm |
|
K6339 |
Slots: 0,45 mm, C-Bar, SH, G CR, for VSi20, VSi21 and MSS08/08, Voith |
|
K6316 |
Slots: 0,45 mm, C-Bar, for VSi20, VSi21, VSi22, Voith |
|
K6317 |
Perforation: 1,2 mm, CL, for VSi10 & MS05/05, Voith |
|
K6318 |
Perforation: 1,2 mm, P, VSi10, VSi11, VSi12, Voith |
|
K6319 |
Perforation: 1,2 mm, VL, for Spectroscreen SS22, Voith |
|
K6236 |
Perforation: 1,4 mm, for Omniscreen OS8, Voith |
|
K6330 |
Perforation: 1,4 mm, for Omniscreen OS8, Voith |
|
K6337 |
Perforation: 1,4 mm, SE, CL, for MSX10/06, Voith |
|
K6343 |
Perforation: 1,4 mm, P-hole, for MultiScreen MSA06/06, Voith |
|
K6344 |
Perforation: 1,4 mm, for Omniscreen OS4, Voith |
|
K6195 |
Perforation: 1,6 mm, new, for CH 3, Lamort |
|
K6196 |
Perforation: 1,6 mm, new, for CH 3, Lamort |
|
K6184 |
Perforation: 1,6 mm, new, for CH 7, Lamort |
|
K6182 |
Perforation: 1,6 mm, new, for SPN 4, Lamort |
|
K6320 |
Perforation: 1,6 mm, SD, for VSi10, MST05/05, MS05/05, Voith |
|
K6321 |
Perforation: 1,6 mm, for VSi10, VSi11, VSi12, Voith |
|
K6340 |
Perforation: 1,6 mm, VL, for Spectroscreen SS30, SS32, Voith |
|
K6341 |
Perforation: 1,6 mm, SS33, V, HF, for Spectroscreen SS31 / 32 / 33, Voith |
|
K6326 |
Perforation: 2,2 mm, C-Bar, for Combisorter and Sortex 0S, CS10, CSM12 - 500 mm, Voith |
|
K6342 |
Perforation: 2,4 mm, Combisorter and Sortex CSM12, CS10, 10S, Voith |
|
K6185 |
Perforation: 3 mm, new, for CH 3, Lamort |
|
K6322 |
Perforation: 6 mm, for separator SP 800, Hett |
|
K9 - SEWAGE TREATMENT PLANTS
K9054 |
Bow screen, Ahlström |
|
K9060 |
72", Appareil, bow screen |
|
K9026 |
Reversing-osmosis plant, Paal, 2 pcs., 1x size 1, throughput: up to 5 m3/h, 1x size 2, throughput: up to 7,5 m3/h - newworthy, ran only for a few days for operating purposes |
|
K9064 |
9 m3/h, SPC 4, diameter: 1.800 mm, with base frame, ADT 150 - complete unit |
|
K9065 |
20 m3/h, flotation unit, incl. reaction tanks, pumps, collecting vats |
|
K9048 |
34 m3/h, SPC 8, Krofta, diameter: 2.400 mm |
|
K9057 |
34 m3/h, SPC 8, Krofta, diameter: 2.400 mm, complete with spare parts |
|
K9049 |
60 m3/h, SPC 10, Krofta, diameter: 3.200 mm |
|
K9061 |
90 m3/h, SPC 12, Krofta, diameter: 3.900 mm |
|
K9062 |
120 m3/h, SPC 15, Krofta, diameter: 4.200 mm |
|
K9053 |
376 m3/h, 8.920 mm Ø x 1.200 mm h, Purgomat, OMC, DF 47 |
|
K9063 |
588 - 765 m3/h, SPC 33, diameter: 11.000 mm |
|
K9040 |
1.290 m3/h, SPC 49, Krofta, diameter: 14.800 mm |
|
K9036 |
2.000 m3/h, SPC 62, Krofta, diameter: 19.900 mm |
|
K9045 |
DAF B-74, Basin Opti, Valmet, micro flotation |
|
K9066 |
Bioreactor incl. pellets - very good condition |
|
|