M0 - PAPER MACHINES

M0368 600 mm, 4 - 20 mpm, 60 - 400 gsm, 5 cylinder moulds, 8 drying cylinders, for watermark and safety papers - very good condition
M0306 1.650 mm, 300 mpm, 60 - 200 gsm, 22 drying cylinders, 2 presses, MG cylinder Ø: 3.600 mm
M0280 1.800 mm, 300 mpm, 45 - 200 gsm, 45 tpd, 25 drying cylinders, 3 presses, with size press - complete plant!
M0365 1.850 mm, 200 mpm, 120 - 140 gsm, 40 tpd
M0194 2.100 mm, 100 - 150 mpm, 60 - 120 gsm, 25 tpd, 10 drying cylinders, 3 presses, MG cylinder, calander, rewinder slitter, corrugated medium
M0307 2.100 mm, 200 mpm, 37 - 240 gsm, 14 / 4 drying cylinders
M0344 2.180 mm, 110 mpm, 90 - 150 gsm, 45 tpd, 16 drying cylinders, 1 Yankee, 2 presses, recycling testliner & corrugated board
M0345 2.180 mm, 80 mpm, 90 - 175 gsm, 30 tpd, 15 drying cylinders, 2 presses, waste paper, triple layer
M0297 2.200 mm, 140 mpm, 90 - 300 gsm, 14 drying cylinders, 3 presses Ø: 1.250 mm
M0331 2.200 mm, 125 - 210 gsm, 100 tpd, 33 drying cylinders, liner with white coating, kraft paper, fluting
M0332 2.200 mm, 250 mpm, 50 - 200 gsm, 30 - 60 tpd, 18 / 8 drying cylinders, 2 presses
M0358 2.250 mm, 300 mpm, 40 - 200 gsm, 60 - 70 tpd, 26 drying cylinders (10 bar)
M0281 2.300 mm, 900 mpm, 50 - 180 gsm, 160 tpd, with size press and stock preparation
M0360 2.320 mm, 100 - 220 gsm, 125 tpd
M0340 2.340 mm, 200 mpm, 80 - 200 gsm, 19 / 12 drying cylinders, 3 presses
M0376 2.360 mm, 400 mpm, 150 tpd
M0378 2.400 mm, 230 mpm, 35 - 240 gsm
M0298 2.400 mm, 170 mpm, 100 - 300 gsm, 18 drying cylinders, 3 presses
M0237 2.450 mm (trimmed), 200 mpm, 90 - 250 gsm, 100 tpd, corrugated medium
M0314 2.450 mm, 200 mpm, 80 - 180 gsm, 120 tpd, 40 drying cylinders, 3 presses, testliner, fluting - complete mill
M0319 2.450 mm, 240 mpm, 80 - 150 gsm, 80 tpd, 18 drying cylinders, 3 presses, testliner, kraft paper - with top wire
M0352 2.450 mm, 500 mpm, 80 - 200 gsm, 130 - 150 tpd
M0348 2.600 mm (at popereel), 60 - 180 gsm, 37 drying cylinders, 3 presses
M0385 2.600 mm working width, 2.540 mm at Popereel, 80 - 200 gsm, up to 75 tpd, 2 presses, packaging paper, fluting
M0282 2.600 mm, 230 mpm, 75 - 300 gsm, 60 tpd, 37 drying cylinders, 2 presses, with size press
M0359 2.900 mm, 700 mpm, 85 tpd
M0354 2.900 mm, 200 mpm, 90 - 200 gsm, 40 - 50 tpd, base paper for corrugated board, fluting
M0296 3.100 mm, 150 mpm, 12 drying cylinders, 3 presses, filter and teabag papers
M0377 3.200 mm, 220 mpm, 20 - 45 gsm, 6 / 5 drying cylinders, 2 presses, fine paper
M0335 3.200 mm, 260 mpm, 80 - 200 gsm, 28 drying cylinders, 3 presses
M0320 3.260 mm, 80 tpd, brown papers
M0374 3.400 mm, 900 mpm, 60 - 250 gsm, 300 tpd
M0383 3.600 mm, 840 mpm, 50 - 170 gsm, 250 - 300 tpd, 4 presses
M0311 3.800 mm, 700 mpm, 60 - 350 gsm, right-hand drive
M0372 3.800 mm, 400 mpm, 60 - 200 gsm, 200 tpd, 22 / 12 drying cylinders Ø: 1.800 mm
M0366 3.870 mm, 570 mpm, 40 - 80 gsm, 130 tpd, 48 drying cylinders
M0291 4.400 mm, 600 mpm, 40 - 180 gsm
M0379 4.600 mm, 460 mpm, 100 - 220 gsm, 420 tpd, testliner, fluting, 2 layer
M0339 4.650 mm, 1.000 mpm, 60 - 140 gsm, 55 drying cylinders, with former and rewinder slitter
M0381 4.900 mm, 500 mpm, 70 - 90 gsm, 330 tpd
M0349 5.000 mm, 90 - 180 gsm, 300 tpd, 5 bar, 3 presses: 60, 70, 80 kN/m, with Symsizer
M0382 5.000 mm, 600 mpm, 100 - 220 gsm, 590 tpd
M0367 5.500 mm, 1.000 mpm, 400 tpd, 39 drying cylinders, 3 presses
M0355 5.600 mm, 1.100 mpm, 42 drying cylinders, 5 bar
M0356 5.600 mm, 850 mpm, 42 drying cylinders, 5 bar
M0357 5.600 mm, 1.100 mpm
M0223 6.640 mm (trimmed), 760 mpm, 41,5 - 60 gsm, 46 drying cylinders, 3 presses, size press
M0375 8.680 mm, 1.600 mpm, 40 - 60 gsm, 850 tpd, 50 drying cylinders Ø: 1.800 mm, 5 bar, 4 Sympress with 4th press, SYM-ZS roll


M1 - TISSUE MACHINES

M1091 1.600 mm, - 200 mpm, 18 - 40 gsm, MG machine
M1093 1.600 mm, 150 mpm, 16 - 40 gsm, 6 tpd, Yankee Ø: 2.500 mm, 6 after-drying cylinders, MG paper machine
M1106 2.000 mm, 700 - 1.100 mpm, 13 - 35 gsm, 50 tpd, Yankee Ø: 3.500 mm, 7,5 bar
M1049 2.000 mm (wire width), 5.000 t/y, compl. tissue machine with de-inking, power house, rewinder slitter
M1096 2.350 mm, 18 - 90 gsm, 30 - 46 tpd, MG paper machine
M1084 2.500 mm, 12 - 40 gsm, 28 - 30 tpd
M1118 2.520 mm, 600 mpm, with rewinder
M1115 2.550 mm, 1.200 mpm, 15,5 - 35 gsm, 60 tpd, Yankee Ø: 3.600 mm
M1114 2.550 mm, 1.700 mpm, 14 - 35 gsm, 90 tpd, Yankee Ø: 4.600 mm, Crescent Former
M1103 2.640 mm (deckle max.), 1.000 mpm, 15,5 - 40 gsm at popereel, 60 - 80 tpd, Ø 3.650 mm, 9,6 bar
M1077 2.680 mm, 1.550 mpm, 14 - 26,3 gsm, 55 - 65 tpd, Beloit - complete line
M1079 2.700 mm, 300 mpm, 14 - 100 gsm, 25 - 30 tpd, compl. plant
M1078 2.700 mm, 700 mpm, 30 - 90 gsm, 38 tpd, machine-glazed paper
M1090 2.700 mm (at popereel), 1.080 mpm, 15 - 30 gsm, 60 tpd, Yankee Ø: 2.600 mm, 10 bar
M1109 2.720 mm, 1.300 mpm, 17 - 25,5 gsm, 77 tpd, Crescent Former
M1120 2.730 mm (at popereel), 1.250 mpm, 15 - 28 gsm, without Yankee
M1101 2.750 mm, 13,5 gsm, 70 tpd
M1094 2.800 mm, 500 mpm, 16 - 70 gsm, 20 - 28 tpd - still in operation
M1116 3.100 mm, 700 mpm, 15 - 40 gsm, 45 tpd
M1105 3.200 mm (at popereel), 1.600 mpm, 70 tpd, Crescent Former, Yankee Ø: 5.500 mm, 8,5 bar, with stock preparation
M1110 3.200 mm, 100 mpm, 30 - 100 gsm, 15 tpd, Yankee paper machine
M1097 3.600 mm, 55 - 65 tpd, kraft and bag papers
M1098 4.500 mm (at popereel), 350 - 700 mpm, 18 - 60 gsm, 40 - 70 tpd
M1067 4.500 mm, 800 - 1.000 mpm, 16 - 30 gsm, 50 - 100 tpd


M2 / M3 - BOARD & CARDBOARD MACHINES

M2039 2.420 mm, 200 mpm, 80 - 400 gsm, 40 tpd, 9 drying cylinders, board and core board
M3017 1.200 mm, 800 - 5.000 gsm, 12 tpd, solid board, gray board for industry
M2047 2.460 mm, 150 mpm, 200 - 580 gsm, 120 tpd, Duplex/Triplex, coated/uncoated
M3020 2.400 mm, 200 - 900 gsm - complete unit
M2035 2.600 mm, 160 mpm, 270 - 600 gsm, 180 tpd, 37 / 18 drying cylinders, coated and uncoated board
M3021 2.700 mm, 700 - 3.600 gsm, Schild, flat-bed drier, 1 press 400 bar
M2048 2.600 mm, 320 - 1.000 gsm, 80 tpd, 26 drying cylinders Ø: 1.500 mm, MG cylinder Ø: 3.500 mm, with hood Brunschweiler
M3016 2.850 mm, 1.000 - 2.000 gsm, 36 tpd, cardboard machine for gray cardboard
M2040 2.640 mm, 180 - 700 gsm, 90 - 100 tpd, 26 drying cylinders, cylinder mould machine - complete line
M2045 2.900 mm (at popereel), 400 - 1.000 gsm, 75 tpd, 26 drying cylinders Ø: 1.350 mm, MG cylinder Ø: 3.500 mm, with hood Valmet


M4 - WET SECTION

Head box

M4062H 2.500 mm (ow), 10.000 lpm, 480 mpm, 40 - 120 gsm, diffusor head box
M4065H 2.606 mm (ow), 600 mpm, Masterjet II
M4069H 2.650 mm, 500 mpm, 45 - 150 gsm, Beloit
M4050H 2.650 mm (ow), throughput: 15.000 - 20.000 lpm
M4071H 2.660 mm, 450 mpm, 80 - 200 gsm, 80 - 120 tpd, Beloit
M4073H 2.750 mm, 12.900 - 18.000 lpm, 240 - 600 mpm, 70 - 200 gsm, closed
M4053H 2.880 mm, wire width: 3.030 mm, 1.600 mpm, 16 - 23 gsm, Over
M4079H 2.900 mm, max. 40.000 lpm, 1.600 mpm, 16 - 32 gsm, Escher Wyss
M4057H 2.912 mm, 13.000 - 24.000 lpm, 600 mpm, 80 - 200 gsm, completely overhauled, including new lip
M4058H 2.950 mm, 33.000 lpm, 500 mpm, 80 - 200 gsm, Valmet
M4099H 3.050 mm (ow), Hogenkamp
M4081H 3.500 mm, 550 mpm, Valmet
M4067H 3.650 mm, 9.600 - 20.300 lpm, 300 mpm, 40 - 110 gsm, DGI
M4051H 4.020 mm, 90.000 lpm, 80 - 210 gsm
M4035H 4.050 mm (ow), 250 mpm, 35 - 135 gsm, 34 - 50 tpd
M4066H 4.550 mm, 15.000 - 37.500 lpm, 100 - 700 mpm, 40 - 150 gsm
M4078H 5.350 mm, 21.200 - 42.300 lpm, 750 mpm, 80 - 190 gsm, Sym Flo P, Valmet
M4054H 5.550 mm, 31.350 - 59.850 lpm, 1.000 mpm, Escher Wyss, step diffusor

Wire section, cylinder moulds and cylinder mould formers

M4057S 1.660 mm wire width, 120 mpm, 35 - 240 gsm, short former with Octopus as spare for cylinder moulds in cardboard and board machines, with round distributor at the head box
M4050S 2.550 mm (untrimmed), 700 mpm, 105 - 200 gsm, Carcano, wire section with top wire, head box (ow): 2.780 mm
M4059S 2.500 mm (trimmed), 2.800 mm (ow), 25 - 150 mpm, 30 - 105 gsm (on the former), consisting of 4 short formers
M4060S 2.500 mm (trimmed), 60 - 150 mpm, 30 - 103 gsm (per cylinder mould), cylinder mould former section consisting of 3 cylinder mould formers, FloatLip-N, with Moduljet head box and round distributor, dimensions: 2.620 mm face x 1.250 mm d
M4049S 2.805 mm (ow head box), length wire section: 13.600 mm, 800 mpm, 90 - 200 gsm, with Voith Duoformer
M4047S 2.870 mm shell length x 800 mm Ø, perforated length: 2.500 mm, perforation: 6 mm, chamber suction couch roll
M4005S 3.400 mm face x 1.400 mm Ø, dandy roll with shower, 1981
M4054S 3.410 mm face x 830 mm Ø, perforated length: 3.010 mm, Escher Wyss, suction couch roll, bearing distance: 4.045 mm, shell: V4A, 3.260 mm
M4038S 3.450 mm face x 2.000 mm Ø, Akuform, Bellmer-Kufferath, dandy roll
M4055S Steam blowing box, 28 zones, for 3.410 mm face, Escher Wyss, suitable for M4054S
M4058S 1.660 mm x 1.000 mm Ø, 3 cylinder moulds

Press section

M4038P 1.850 mm / 1.900 mm face, Ø: 805, 600, 635 mm, speed: 120 mpm, nip pressure: 60 - 80 kN/m
M4029P 2.600 mm (trimmed) x 1.015 mm Ø, 750 mpm, nip pressure: 350 kg/cm, jumbo press
M4026P 2.800 mm x 1.104 mm Ø, 300 kN/m, Voith, compact press
M4039P 2.800 mm face, press section, suction press Ø: 690 / 450 mm, Jumbo press Ø: 1.300 mm, nip pressure: 180 kg/cm
M4030P 3.860 mm, 2 x Nipco rolls, 1 x offset roll, 2 x central rolls
M4036P 5.600 mm face x 655 mm Ø, 5 crowned press rolls with the following key data: speed: 1.000 mpm, nip pressure: 70 / 90 / 120 kN/m
M4037P 5.600 mm face x 900 mm Ø, 4 pcs. offset press rolls with the following key data: speed: 1.070 mpm, nip pressure: 70 / 90 / 120 kN/m, hardness: 2 rolls: 24 P&J, 2 rolls: 88 ShD
M4033P 5.600 mm face x 1.115 mm Ø, 5 crowned press rolls with the following key data: speed: 1.070 mpm, nip pressure: 70 / 90 / 120 kN/m
M4034P 5.600 mm face x 1.373 mm Ø, 5 crowned press rolls with the following key data: speed: 1.070 mpm, nip pressure: 70 / 90 / 120 kN/m
M4035P 5.600 mm face x 1.400 mm Ø, 2 pcs. Top Rock press rolls with the following key data: speed: 1.000 mpm, nip pressure: 70 / 90 / 120 kN/m
M4023P 7.416 mm face x 1.527 mm Ø, central roll
M4024P 7.570 mm face x 865 mm Ø, CC-roll
M4022P 7.664 mm effective length x 1.100 mm Ø, suction roll


M5 - DRYING SECTION

M5056 1.950 mm x 1.500 mm, speed: 120 mpm, working pressure: 5 bar, 2 cylinders - with framing
M5058 2.500 mm x 1.500 mm, 3 bar
M5053 2.600 mm x 1.500 mm, 5 bar, 21 drying cylinders, Carcano
M5015 2.675 mm x 1.500 mm, 2,5 bar, 2 drying cylinders
M5047 2.800 mm x 1.220 mm, 5 bar, drying cylinder
M5057 2.845 mm x 1.500 mm, 39 drying cylinders: 3 bar + 4 drying cylinders: 8 bar, 43 + 2 cooling cylinders, 4 drying groups
M5032 2.950 mm x 1.500 mm, 5 bar, drying cylinders
M5031 6.150 mm x 1.830 mm, working pressure: 10 bar, 35 drying cylinders - NEW
M5054 8 Drying cylinders + 2 cooling cylinders, cylinder Ø: 1.500 mm, shell length: 1.810 mm, 120 mpm, 34 - 240 gsm, max. admissible working overpressure: p = 5.0 bar, working pressure: 3 bar
M5055 Spooner, air trajectory floating web dryer with ventilators and motors, two steam heaters right and left, two recirculating fans type: 30A, an exhaust ventilator type: 27M, a hood ventilator type: 18M


M6 - POPEREELS, CALANDER AND SUPERCALANDER

Popereel

M6031P 1.600 mm, 110 mpm, 34 - 240 gsm
M6014P 2.310 mm, face: 2.450 mm
M6029P 2.500 mm, reel Ø: 2.000 mm, speed: 600 mpm
M6017P 2.600 mm, 400 mpm, up to 140 gsm
M6016P 2.670 mm, 800 mpm, 30 - 80 gsm, rewind Ø: 2.850 mm, light papers, tissue
M6032P 2.800 mm, face: 3.450 mm, speed: 1.100 mpm, Voith
M6030P 3.300 mm, reel Ø: 2.450 mm, speed: 550 mpm
M6026P 3.300 mm, 600 mpm, 80 - 200 gsm, max. reel Ø: 2.200 mm
M6028P 4.400 mm, 700 mpm, mother reels Ø: 2.700 mm
M6020P 5.040 mm, 260 mpm, 180 - 560 gsm, rewind Ø: 1.200 mm

Calander

M6037G 1.000 mm, 2 rolls, Kleinewefers
M6029G 1.100 mm, Kleinewefers
M6050G 1.400 mm, 120 t, 2 rolls, Ø: 550 mm
M6049G 1.550 mm, 2 rolls, Ø: 500 mm
M6052G 1.600 mm, 110 mpm, 7 rolls, Eck & Söhne
M6028G 1.600 mm, width of paper web: 1.800 mm, 2 rolls, Küsters
M6041G 2.400 mm, 400 mpm, 30 - 700 gsm, 2 rolls
M6047G 2.400 mm face, 300 mpm, max. 85 gsm, 200 daN/m, 3 rolls, Küsters
M6032G 2.500 mm face, 300 mpm, 2 rolls (550 / 380 mm), Küsters, compl.
M6039G 2.500 mm, 400 mpm, 32 - 200 gsm, 100 daN/cm, 2 rolls, Küsters
M6046G 2.650 mm, up to 350 mpm, 4 rolls, Bruderhaus
M6033G 2.730 mm, 4 rolls with one S-roll, machine calander
M6036G 3.200 mm, 500 mpm, 90 kN/m, 2 rolls
M6042G 3.700 mm, 5 rolls (3 heated, 2 Nipco)
M6043G 3.700 mm, 5 rolls (3 heated, 1 Nipco, 1 steel)
M6031G 4.200 mm, Voith, soft calander
M6048G 5.050 mm paper web width, 800 mpm, 80 - 200 gsm, 20 - 150 kN/m, 2 rolls, thermoroll: 860 mm, Metso, testliner and fluting

Supercalander

M6022S 1.250 mm face, 12 rolls, Bruderhaus
M6024S 2.200 mm face, 18 rolls
M6018S 2.630 mm, 15 - 600 mpm, 400 kg/cm2, 16 rolls, 2 S-rolls
M6023S 4.100 mm, 12 rolls, Kleinewefers


M7 - COATING SECTIONS, SIZE PRESSES

Coating sections

M7055S 400 mm x 400 mm - 1.300 mm x 1.100 mm sheet size, sheet thickness: 180 - 300 gsm, 6.000 sheets/hour, laminator
M7051S 1.650 mm, Extruder
M7060S 2.600 mm, BTG, bill blade coater, with spare parts
M7061S 2.900 mm, 900 mpm, 45 - 100 gsm, coating weight: 5 - 12 gsm, BTG
M7049S 2.900 mm (working width), 550 mpm, 55 - 165 gsm, Vari-Bar: 6 - 12 gsm, Combiblade: 6 - 25 gsm, Jagenberg, coater
M7052S 3.720 mm, 1.150 mpm, 45 - 65 gsm, coating weight: 80 - 120 gsm
M7059S 4.000 mm, 2 coating units, Combiblade / roll wiper, IR driers, 10 drying cylinders
M7062S 5.780 mm (working width), 900 - 1.100 mpm, raw weight: 40 - 68 gsm, coating weight: 2 x 18 gsm
M7063S Staes, colour preparation station for preparing and mixing of starch, colour etc. - consisting of: 4 tanks (approx. 1.200 l), dosing station
M7064S 2 Tanks with agitators, volume: between 1 and 1,5 m3, material: 1.4571 or equivalent

Size Presses

M7065L 1.820 mm, new size press roll, rubber covered
M7001L 2.570 - 3.750 mm, 500 mpm, 2,5 gsm on each side, rolls Ø: 1.000 mm, Felder, type SP 30
M7066L 2.850 mm (face), roll Ø: 550 mm, vertical paper passage, with size kitchen
M7029L 3.300 mm, BTG, film press
M7019L 3.380 mm (3.500 mm at popereel), 750 mpm, 50 - 400 gsm, rolls Ø: 900 mm, Clupak
M7023L 3.800 mm roll width, Ø: 600 mm, 400 mpm
M7015L 4.450 mm (face) x 1.100 mm Ø, Clupak
M7021L RPM 1440, HP 2, power: 1,8 kW, speed: 1.500 rpm, SWECO S48S, separator


M8 - MG – CYLINDER

M8001 1.900 mm x 3.200 mm, 3 bar, Escher Wyss
M8023 2.500 mm x 2.500 mm, Carcano
M8026 3.030 mm x 3.600 mm, Over, with hood
M8025 3.850 mm x 4.200 mm, 5 bar, Escher Wyss
M8015 4.600 mm x 4.250 mm, 600 mpm, working pressure: 8 bar, complete section
M8024 5.000 mm x 5.600 mm, 250 mpm, 5 bar, Escher Wyss